Netgear gsm7312 Manuale Utente

7-36

Switching Commands

participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 
seconds). The factory default is 20 centiseconds (0.2 seconds). The finest 
granularity of specification is 1 centisecond (0.01 seconds). 

Specifies the period of time to wait after receiving an unregistered request for an 
attribute before deleting the attribute. Current attributes are a VLAN or 
multicast group. This may be considered a buffer time for another station to 
assert registration for the same attribute in order to maintain uninterrupted 
service. There is an instance of this timer on a per-Port, per-GARP participant 
basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The 
factory default is 60 centiseconds (0.6 seconds). The finest granularity of 
specification is 1 centisecond (0.01 seconds). 

This Leave All Time controls how frequently LeaveAll PDUs are generated. A 
LeaveAll PDU indicates that all registrations will shortly be deregistered. 
Participants will need to rejoin in order to maintain registration. There is an 
instance of this timer on a per-Port, per-GARP participant basis. The Leave All 
Period Timer is set to a random value in the range of LeaveAllTime to 
1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 
seconds). The factory default is 1000 centiseconds (10 seconds). The finest 
granularity of specification is 1 centisecond (0.01 seconds). 

Indicates the GMRP administrative mode for the port. It may be enabled or 
disabled. If this parameter is disabled, Join Time, Leave Time and Leave All 
Time have no effect. The factory default is disabled. 

Indicates the GVRP administrative mode for the port. It may be enabled or 
disabled. If this parameter is disabled, Join Time, Leave Time and Leave All 
Time have no effect. The factory default is disabled. 

This command enables or disables GARP Multicast Registration Protocol (GMRP) on the system. 
The default value is disable.

This command enables or disables GARP Multicast Registration Protocol on a selected interface. 
The <slot.port> parameter identifies the interface on which to configure the mode. If an interface 
which has GARP enabled is enabled for routing or is enlisted as a member of a LAG, GARP 
functionality will be disabled on that interface. GARP functionality will subsequently be re-
enabled if routing is disabled and LAG membership is removed from an interface that has GARP 
enabled.

disable