Quantum SuperLoader 3 Guida All'Installazione Rapida
This Quick Start Guide contains a
sequence of steps recommended for
unpacking and installing a bar code
reader in the Quantum SuperLoader.
sequence of steps recommended for
unpacking and installing a bar code
reader in the Quantum SuperLoader.
Warning:
The bar code
reader is a Class 1 laser
product, complying
with 21 CFR 1040.10
and 1040.11. The use of
controls or adjustments
or the performance of
procedures other than those
specified herein may result
in hazardous radiation
exposure.
product, complying
with 21 CFR 1040.10
and 1040.11. The use of
controls or adjustments
or the performance of
procedures other than those
specified herein may result
in hazardous radiation
exposure.
It is recommended that
authorized service personnel
perform this upgrade.
authorized service personnel
perform this upgrade.
For additional information, visit
www.quantum.com, refer to the
Quantum Superloader Automated
Tape Library User Manual installed as
a PDF (portable document format) file
on the SuperLoader Documentation
CD, or contact Quantum Technical
Support and Customer Service by
calling 1-800-284-5101.
www.quantum.com, refer to the
Quantum Superloader Automated
Tape Library User Manual installed as
a PDF (portable document format) file
on the SuperLoader Documentation
CD, or contact Quantum Technical
Support and Customer Service by
calling 1-800-284-5101.
Note:
Adobe
®
Acrobat
®
Reader
4.0 or later is required to view
and print PDF documents.
To download a free copy of
Adobe Acrobat Reader, go to
www.adobe.com.
Step 1:
Unpack the Bar Code Reader
a.
Place the carton on an electrostatic discharge (ESD) safe work surface. As you place
the carton on the work surface, look for markings on the shipping carton that
indicate the top of the carton so you can position the carton top-side up.
indicate the top of the carton so you can position the carton top-side up.
b.
Using scissors, a utility knife, or other appropriate tool, carefully cut the packing
tape along the length and ends of the carton.
c.
Fold open the box flaps.
d.
Remove the plastic bag containing instructions and warranty information.
e.
Remove the top piece of foam from the carton.
f.
Reach into the carton and lift out the bar code reader. The bar code reader should
be enclosed in an antistatic package.
Caution:
This device is static-sensitive. Proper grounding and electrostatic
discharge (ESD) handling precautions are required before removing the bar
code reader from its packaging.
code reader from its packaging.
g.
Set the bar code reader down on the work surface.
Step 2:
Unmount the SuperLoader
Warning:
Two persons are required to lift the SuperLoader or unmount it
from a rack.
Before you can install the bar code reader, you must remove the right magazine or
magazine blank from the SuperLoader and then remove the SuperLoader from its
rack or cabinet. For instructions about removing magazines and unmounting the
SuperLoader from a rack, refer to the
magazine blank from the SuperLoader and then remove the SuperLoader from its
rack or cabinet. For instructions about removing magazines and unmounting the
SuperLoader from a rack, refer to the
Quantum SuperLoader User’s Guide.
Note:
Unmounting the SuperLoader requires a #1 PHILLIPS
®
screwdriver. This
screwdriver will also be required during the remainder of the bar code reader
upgrade procedure.
SuperLoader™ Bar Code Reader Upgrade
Quick Start Guide