Net Media nm-utpcam Guida Specifiche

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com

MAN-UTPCAM     REV0703A

Elbow Bracket

Adjusts camera angle at base, 

screw, and housing.

Camera Lens

Factory set - rotates in either 

direction to adjust focus.

Camera Bracket

Slot indicates image bottom.

Base, Gasket & Screws

Mount to round 4” junction box.

UTP Jack

Female RJ-45 connector transmits 

both power and video across CAT5 

and other UTP cable types.

UTP Video Encoder built into camera
Includes UTP Video Decoder module
One Wire Video™ Installation
Uses one inexpensive UTP cable
Supports up to 1000 ft of UTP cable
Supports industry standard wiring schemes
Excellent image quality
Tough billet aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Accepts photo lens accessories
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty

Housing Cap

Externally threaded - accepts 

37mm lenses and accessories.

Locking Ring

Secures elbow bracket to 

base at desired position.

Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket, 
    Locking Ring, Base, Gasket, UTP Video Encoder, UTP Jack). 
2. NetMedia UTP Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.

This general purpose surveillance camera utilizes a built-in NetMedia UTP Video Encoder and external UTP Video Decoder 

to exchange power and video across Unshielded Twisted Pair (UTP) cable, such as CAT5. There is no need to run multiple 

cables to the camera location! It mounts to a typical round 4 inch junction box and is viewed with a security monitor or 

television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.

UTP Video Encoder

Built into camera - exchanges 

power and video with Decoder for 

One Wire Video™ on UTP cable.

B/W

Color

Day/Night

 Color

Housing

NM-UTPCAM-BW
NM-UTPCAM-BB
NM-UTPCAM-BI
NM-UTPCAM-BS

NM-UTPCAM-CW
NM-UTPCAM-CB 
NM-UTPCAM-CI
NM-UTPCAM-CS

White 
Black 
Ivory 
Silver 

NM-UTPCAM-HW
NM-UTPCAM-HB
NM-UTPCAM-HI
NM-UTPCAM-HS

Available in choice of colors:

B/W camera          Color camera       Day/Night Color     Housing

Power Input

Connects to 24V DC wall 

transformer (included) 

and AC outlet.

UTP Jack

Connects to Camera UTP 

Jack via straight-through 

wired UTP cable (T-568A).

Red LED

Indicates Power.

RCA Video Out

Connects to viewing 

device such as monitor, 

DVR, TV, or modulator.

UTP Video Decoder

Camera Lens: 

 

Image Sensor: 
Resolution: 
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:     

 

Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
UTP Decoder Video Output:
UTP Decoder Video Output Connector:
UTP Decoder Power Input:
UTP Decoder Power Connector: 
UTP Decoder Size:
UTP Decoder Weight:
External Accessory Threads: 
Housing Size:   
Base Size:   

 

Base Mounting Holes: 
Assembly Weight:

Female RJ-45 jack

UTP: CAT5 or better

Up to 1000’

Proprietary

Composite

Female RCA

  24V DC, 200mA

5.5mm OD, 2.1mm ID, center positive

3.2” long, 2.2” wide, 0.9” thick

3 oz.

37mm x .75 pitch

2.13” dia. x 4” long

4.5“ dia., 0.75” high, 0.5“ hole

3.5” centers

14 oz.

(subject to change without notice)

3.6mm

1/3” CCD

350 lines

72˚ Horizontal

0.7 Lux F2.0

Yes

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

3.6mm

1/3” CCD

470 lines

72˚ Horizontal

0.3 Lux F1.2

Yes