Net Media nm-utpball Guida Specifiche

Pagina di 4
NM-UTPB
ALL
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
UTP Security Camera
NM-UTPBALL
Indoor Ball Camera
MAN-UTPBALL     REV0703A
Camera Assembly
Available in UV Paintable White
NM-UTPBALL-BW
NM-UTPBALL-CW
White
NM-UTPBALL-HW
B/W camera          Color camera       Day/Night Color     Housing
Elbow Bracket
Adjusts camera angle at base, 
screw, and housing.
Camera Lens
Factory set - rotates in either 
direction to adjust focus.
Base Plate
Supports UTP Encoder and cable.
Mount to rectangular junction box.
UTP Jack
Female RJ-45 connector transmits 
both power and video across CAT5 
and other UTP cable types.
UTP Video Encoder built into camera
Includes UTP Video Decoder module
One Wire Video™ Installation
Uses one inexpensive UTP cable
Supports up to 1000 ft of UTP cable
Supports industry standard wiring schemes
Excellent image quality
Tough billet aluminum housing
Internally routed cables
Mounts to standard electrical fixtures
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
Housing Cap
Remove to adjust focus.
Locking Ring
Secures elbow bracket to Base 
Plate at desired position.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket, 
    Locking Ring, Base Plate, UTP Video Encoder, UTP Jack). 
2. NetMedia UTP Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.
This general purpose surveillance camera utilizes a built-on NetMedia UTP Video Encoder and external UTP Video Decoder 
to exchange power and video across Unshielded Twisted Pair (UTP) cable, such as CAT5. There is no need to run multiple 
cables to the camera location! It mounts to a typical rectangular junction box and is viewed with a security monitor or 
television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.
UTP Video Encoder
Not shown - Built into camera, it 
exchanges power and video with Decoder 
for One Wire Video™ on UTP cable.
B/W
Color
Day/Night
 Color
Power Input
Connects to 24V DC wall 
transformer (included) 
and AC outlet.
UTP Jack
Connects to Camera UTP 
Jack via straight-through 
wired UTP cable (T-568A).
Red LED
Indicates Power.
RCA Video Out
Connects to viewing 
device such as monitor, 
DVR, TV, or modulator.
UTP Video Decoder
FEATURES
Camera Lens: 
 
Image Sensor: 
Resolution: 
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:     
 
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
UTP Decoder Video Output:
UTP Decoder Video Output Connector:
UTP Decoder Power Input:
UTP Decoder Power Connector: 
UTP Decoder Size:
UTP Decoder Weight:
Housing Size:   
Base Size:   
 
Base Mounting Holes: 
Assembly Weight:
Female RJ-45 jack
UTP: CAT5 or better
Up to 1000’
Proprietary
Composite
Female RCA
  24V DC, 200mA
5.5mm OD, 2.1mm ID, center positive
3.2” long, 2.2” wide, 0.9” thick
3 oz.
2.33” dia.
4.5“ long, 2.75” wide
3.25” centers
14 oz.
(subject to change without notice)
3.6mm
1/3” CCD
350 lines
72˚ Horizontal
0.7 Lux F2.0
Yes
3.7mm
1/4” CCD
470 lines
54˚ Horizontal
0.5 Lux F1.2
No
3.6mm
1/3” CCD
470 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
SPECIFICATIONS
B/W
Color
    Day/Night Color