Net Media nm-utpeye Guida Specifiche

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com

MAN-UTPEYE     REV0703A

Interior Base

Mounts in round 4” electrical

fixtures or other openings

2.7” dia. x 2.5” deep.

Camera Lens

Factory set - rotates in either 

direction to adjust focus.

Camera Eyeball

Adjusts for desired

field of view.

Mounting Ring(Not Visible)

Beneath Bezel Ring - secures 

Interior Base to mounting surface.

UTP Jack

Female RJ-45 connector transmits 

both power and video across CAT5 

and other UTP cable types.

UTP Video Encoder built into camera
Includes UTP Video Decoder module
One Wire Video™ Installation
Uses one inexpensive UTP cable
Supports up to 1000 ft of UTP cable
Supports industry standard wiring schemes
Excellent image quality
Tough billet aluminum housing
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty

Bezel Ring

Attaches to Interior Base and

secures Eyeball position.

Product Includes:
1. Camera Assembly (Camera Eyeball, Interior Base, Bezel Ring, 
    Mounting Ring, UTP Video Encoder, UTP Jack). 
2. NetMedia UTP Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.

This general purpose surveillance camera utilizes a built-in NetMedia UTP Video Encoder and external UTP Video Decoder to 
exchange power and video across Unshielded Twisted Pair (UTP) cable, such as CAT5. There is no need to run multiple cables to 
the camera location! It mounts in round 4 inch electrical fixtures or 2.7 inch diameter holes and is viewed with a security moni-
tor or television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.

Camera Lens: 

 

Image Sensor: 
Resolution: 
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:     

 

Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
UTP Decoder Video Output:
UTP Decoder Video Output Connector:
UTP Decoder Power Input:
UTP Decoder Power Connector: 
UTP Decoder Size:
UTP Decoder Weight:
Bezel and Eyeball Profile: 
Assembly Size:   
Internal Base Size: 

 

 

Mounting Ring Holes: 
Assembly Weight:

Female RJ-45 jack

UTP: CAT5 or better

Up to 1000’

Proprietary

Composite

Female RCA

  24V DC, 200mA

5.5mm OD, 2.1mm ID, center positive

3.2” long, 2.2” wide, 0.9” thick

3 oz.

4.6” dia. x 1.1” high
4.6” dia. x 3.3” long

2.65“ dia. x 2.5” deep

3.5” centers

1 lb.

(subject to change without notice)

3.6mm

1/3” CCD

350 lines

72˚ Horizontal

0.7 Lux F2.0

Yes

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

3.6mm

1/3” CCD

470 lines

72˚ Horizontal

0.3 Lux F1.2

Yes

UTP Video Encoder

Built into camera - exchanges 

power and video with Decoder for 

One Wire Video™ on UTP cable.

B/W

Color

Day/Night

 Color

Camera Assembly

NM-UTPEYE-BW
NM-UTPEYE-BN

NM-UTPEYE-CW
NM-UTPEYE-CN

White 
Nickel

NM-UTPEYE-HW
NM-UTPEYE-HN

Available in choice of colors:

B/W camera          Color camera       Day/Night Color     Housing

Power Input

Connects to 24V DC wall 

transformer (included) 

and AC outlet.

UTP Jack

Connects to camera UTP 

Jack via straight-through 

wired UTP cable (T-568A).

Red LED

Indicates Power.

RCA Video Out

Connects to viewing 

device such as monitor, 

DVR, TV, or modulator.