Net Media nm-vidcam Guida Specifiche
NM-VIDC
AM
NM-VIDC
AM
MAN-VIDCAM REV0612A
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
Security Video Camera
NM-VIDCAM
Indoor/Outdoor Weather Resistant
Elbow Bracket
Adjusts camera angle at base,
screw, and housing. Installs in
1/2” junction box covers.
screw, and housing. Installs in
1/2” junction box covers.
Camera Lens
Comes prefocused from
factory but can be adjusted
by rotating in either direction.
Camera Bracket
Slot indicates image bottom;
rotate to adjust camera.
Base, Gasket & Screws
Mount to round 4” junction box.
Video Connector
Female BNC connector.
Power Connector
12V DC 300mA, center positive.
Excellent image quality
Tough billet aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Accepts photo lens accessories
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
Tough billet aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Accepts photo lens accessories
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Output Connector:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Output Connector:
Power Requirement:
Power Connector:
External Accessory Threads:
Housing Size:
Base Size:
Power Connector:
External Accessory Threads:
Housing Size:
Base Size:
Mounting Holes:
Weight:
Weight:
FEATURES
Housing Cap
Externally threaded to accept
37mm lenses and accessories.
Locking Ring
Secures elbow bracket to
base at desired position.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, Video Connector, Power Connector).
2. 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting hardware (Mounting Screws, Grounding Strap, Screw and
Compression Ring).
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, Video Connector, Power Connector).
2. 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting hardware (Mounting Screws, Grounding Strap, Screw and
Compression Ring).
Housing is adjustable
180˚ in either direction.
This general purpose security camera mounts to a typical round 4 inch junction box and is viewed with a security monitor.
Other junction boxes from your local hardware store may also be used after replacing the round base with another that has
a 1/2 inch diameter hole for the elbow bracket. To view the camera on a single standard television, use the TV’s composite
RCA Video Input jack.
Other junction boxes from your local hardware store may also be used after replacing the round base with another that has
a 1/2 inch diameter hole for the elbow bracket. To view the camera on a single standard television, use the TV’s composite
RCA Video Input jack.
Female BNC, 75 Ohm
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
37mm x .75 pitch
3.13“ dia., 4” long
4.5” dia., 0.75” high, 0.5“ hole
3.5” centers
1 lb.
(subject to change without notice)
3.6mm
1/3” CCD
350 lines
72˚ Horizontal
0.7 Lux F2.0
Yes
3.7mm
1/4” CCD
470 lines
54˚ Horizontal
0.5 Lux F1.2
No
3.6mm
1/3” CCD
470 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
Day/Night
Color
SPECIFICATIONS
B/W
Color
Day/Night Color
B/W
Color
Housing
Available in choice of colors:
B/W camera Color camera Day/Night Color Housing
NM-VIDCAM-BW
NM-VIDCAM-BB
NM-VIDCAM-BI
NM-VIDCAM-BS
NM-VIDCAM-BB
NM-VIDCAM-BI
NM-VIDCAM-BS
NM-VIDCAM-CW
NM-VIDCAM-CB
NM-VIDCAM-CI
NM-VIDCAM-CS
NM-VIDCAM-CB
NM-VIDCAM-CI
NM-VIDCAM-CS
White
Black
Ivory
Silver
Black
Ivory
Silver
NM-VIDCAM-HW
NM-VIDCAM-HB
NM-VIDCAM-HI
NM-VIDCAM-HS
NM-VIDCAM-HB
NM-VIDCAM-HI
NM-VIDCAM-HS