Initial cds-166 Guida Utente

· 7 ·

Keep  the  volume level low enough  to  be
aware of road and traffic conditions.

Do  not  expose  the  product  to  water  or
excessive  moisture.  This  could  cause
electrical shorts, fire or other damage.

Parking in direct sunlight can produce very
high  temperatures  inside  your  vehicle.
Give  the  interior a  chance  to  cool  down
before starting playback.

Put the unit where ventilation is good
enough to prevent overheating.
Never put the unit in direct sunlight or near
heat sources.
Put the unit horizontally, never put any
heavy object on the unit.
To protect the laser, do not put the unit
where there is most dust. If there is dust
on the laser, use a cleaning disc to clean it.
Refer to the operation instructions of
the cleaning disc you bought.

Water  will appear  on  the  pickup  lens  in
the following cases:

The unit is suddenly moved from a cold 
place to a warm place.
The unit is put in a room with a heater, or
in the cold air from a air-conditioner.

Use the unit in a humid place. In these
cases, the unit can not work. Unload the
disc and leave the unit on for about
one hour to evaporate the water.

Use  soft  cloth  with  a  little  neutral
detergent to wipe the cabinet, panel and
controls. Never use abrasive pater,
polishing powder or solvent like alcohol
and gasoline.

To keep the disc clean, do not touch
the play sides of the disc.
Do not attach paper or tape to the disc.

Keep the disc away from direct sunlight
or heat sources.
Store  the  disc  in  a  disc  case  after
playback.

Before playback, wipe the disc outwards
from the center with clean cloth.

Do not use any type of solvent such as
thinner, benzine, commercially available
cleaners or antistatic spray.