Initial idm-fd10 Guida Utente

· 13 ·

Caution: This DVD player and display screen unit are intended for the entertainment and use of

rear seat passengers only. It is not recommended that the driver of the vehicle that this device is 

installed in view the screen while the vehicle is in motion.

The owner of the vehicle should familiarize him or herself with all functions of the unit prior to 

operating the vehicle in anticipation of user questions. Should you need to demonstrate a feature 

or function it is recommended that you do so only when it is safe, such as of the road.

   Press the  MENU  button on the main unit to select Brightness adjustment and press  DOWN  

    or UP buttons on the main unit until moderate brightness is available.

   Press the  MENU  button to select Contrast adjustment and press DOWN  or  UP  buttons until 

   moderate contrast is available.

   Press the  MENU  button to select Saturation adjustment and press  DOWN  or UP buttons until 

   moderate saturation is available.

   Press the  MENU  button to select Hue adjustment and press  DOWN or  UP  buttons until 

   moderate hue is available.

   Press the  MENU  button to select Sharpness adjustment and press  DOWN  or  UP  buttons 

   until moderate sharpness is available.

   Press the LAMP L button on the main unit or on the remote control to turn LAMP L on or off.

   Press the LAMP R button on the main unit or on the remote control to turn LAMP R on or off.

   Also, the lamps can be controlled by the car doors. When a door is opened, the two lamps will 

   light; when the door is closed, the two lamps will go out.

   The Wireless Headphone Signal Transmitter/ FM Signal Transmitter can transmit audio signal 

   which is input to the main unit, you can use a wireless headphone to receive it.

   As the FM Signal Transmitter can transmit 7 FM frequencies: 87.7MHz, 87.9MHz, 88.1MHz, 

   88.3 MHz, 88.5MHz, 88.7 MHz, and 88.9MHz. You can also use the radio's FM band to receive 

   the signal which is input to the main unit.

       To change the FM Signal Transmitter transmitting frequency, press the FM-TX button on the 

        main unit to shift between the 7 reset frequencies.

        In FM band, tune the radio to a frequency the same as the FM Signal Transmitter 

        transmitting frequency, the radio will receive the audio signal.