Sony STR-DA2400ES Guida Utente
103
GB
D:\Chin Meng's job\SONY-HA\CEL\3289204422\04GB-STRDA2400ESUC\090OTH_GB.fm
masterpage: Right
STR-DA2400ES
3-289-204-42(2)
3-289-204-42(2)
Oth
e
r Op
eratio
ns
3
Select “SAVE EXIT” in step 2.
The measurement results are saved.
The measurement results are saved.
4
Press
V/v repeatedly to select the Auto
Calibration Type, then press
.
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker settings menu. Save the measurement
results first, then try to change the settings if you
want.
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker settings menu. Save the measurement
results first, then try to change the settings if you
want.
When you select “PHASE INFO.”
You can check the phase of each speaker (in
phase/out of phase).
phase/out of phase).
Press
V/v repeatedly to select a speaker,
then press
to return to step 1 in “To
*
xxx represent a speaker channel.
FL Front Left
FR Front Right
CNT Center
SL Surround Left
SR Surround Right
SB Surround Back
SBL Surround Back Left
SBR Surround Back Right
SW Subwoofer
FR Front Right
CNT Center
SL Surround Left
SR Surround Right
SB Surround Back
SBL Surround Back Left
SBR Surround Back Right
SW Subwoofer
Tip
Depending on the position of the subwoofer, the
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
For details on each sound field type, see
“Enjoying a pre-programmed sound field”
(page 58).
“Enjoying a pre-programmed sound field”
(page 58).
Press 2CH/A.DIRECT, A.F.D.,
MOVIE, or MUSIC repeatedly.
MOVIE, or MUSIC repeatedly.
The selected sound field type appears on the
display.
display.
EXIT
Exits the setting process
without saving the
measurement results.
without saving the
measurement results.
Auto
Calibration
Type
Calibration
Type
Explanation
FULL FLAT
Makes the measurement of
frequency from each speaker
flat.
frequency from each speaker
flat.
ENGINEER
Sets the frequency
characteristics to a set that
matches that of the Sony
listening room standard.
characteristics to a set that
matches that of the Sony
listening room standard.
FRONT REF
Adjusts the characteristics of
all the speakers to match the
characteristics of the front
speaker.
all the speakers to match the
characteristics of the front
speaker.
OFF
Set the Auto Calibration EQ
to off.
to off.
Item
Explanation
Display
window
window
Explanation
xxx*: IN
The speaker is in phase.
xxx*: OUT
The speaker is out of phase. The
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“xxx: OUT” appears on the
display even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“xxx: OUT” appears on the
display even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
xxx*– – –
No speakers are connected.
Selecting a sound field type
continued