Sony STR-DA3400ES Guida All'Installazione Rapida

Pagina di 128
68
GB
D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\070SET_GB.fm
masterpage: Left
STR-DA3400ES
3-289-137-41(1)
Test Tone (Test Tone)
• OFF
• AUTO
The test tone is output from each speaker in 
sequence.
• L, C, R, SR, SB, SBR, SBL, SL, SW
You can select which speakers will output 
the test tone.
Some items may not be displayed, 
depending on the setting of the speaker 
pattern.
Phase Noise (Phase Noise)
• OFF
• L/C, C/R, L/R, R/SL, R/SR, SR/SL, 
SR/SBR, SBR/SBL, SR/SB, SBL/SL, 
SB/SL, SL/L, L/SR
Lets you output the test tone sequentially 
from adjacent speakers.
Some items may not be displayed, 
depending on the setting of the speaker 
pattern.
Phase Audio (Phase Audio)
• OFF
• L/C, C/R, L/R, R/SL, R/SR, SR/SL, 
SR/SBR, SBR/SBL, SR/SB, SBL/SL, 
SB/SL, SL/L, L/SR
Lets you output the front 2 channel source 
sound (instead of the test tone) sequentially 
from adjacent speakers.
Some items may not be displayed, 
depending on the setting of the speaker 
pattern.
Sur Back Assign 
(Settings of the surround back 
speaker(s))
• OFF
If you have not connected surround back 
speakers, select “OFF”.
• BI-AMP
If you connect front speakers in a bi-
amplifier configuration, select “BI-AMP”.
Note
Set “Sur Back Assign” to “OFF”, then connect the 
surround back speakers to this receiver when you 
want to change the connection from a bi-amplifier 
connection to a surround back speakers connection. 
Set up the speakers again after you connect the 
surround back speakers. See “9: Calibrating the 
appropriate speaker settings automatically (Auto 
Calibration)” (page 43)
 or “Adjusting the speaker 
settings manually” (page 64)
.
Crossover Freq
(Speaker crossover frequency)
Lets you set the bass crossover frequency of 
speakers that has been set to “SMALL” in the 
Speaker settings menu. Measured speaker 
crossover frequency is set for each speaker 
after the Auto Calibration.
The adjusted value is set for each speaker 
when you adjust the speaker crossover 
frequency using “Crossover Freq” after the 
Auto Calibration.
Test Tone menu parameters
Other menu parameters of 
Speaker settings