Sony HDR-SR5 Manuale Utente
16
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 101) after
attaching it to your camcorder.
battery pack (H series) (p. 101) after
attaching it to your camcorder.
b
Notes
• You cannot attach any “InfoLITHIUM” battery
pack other than the H series to your camcorder.
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
is facing up.
2
Connect the power cord to the AC
Adaptor and the wall outlet.
Adaptor and the wall outlet.
3
Slide the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
direction of the arrow to OFF
(CHG) (the default setting).
4
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
it in the direction of the arrow
until it clicks.
5
Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
Handycam Station securely, all
the way to the bottom.
The /CHG (charge) lamp lights up and
charging starts. When the /CHG
(charge) lamp turns off, the battery is
fully charged.
charging starts. When the /CHG
(charge) lamp turns off, the battery is
fully charged.
b
Notes
• When inserting the camcorder into the
Handycam Station, close the DC IN jack cover.
4
3
1
2
5
5
POWER
switch
switch
DC IN jack
DC plug
AC Adaptor
Power cord
To the wall outlet
/CHG
(charge) lamp
Battery pack