LaCie 301200u Manuale Utente

Pagina di 48
LaCie Big Disk Extreme+
Triple Interface
page 
Glossary
partitioning. A partition is just one section of the hard 
drive that will contain either special data put there by 
Silverlining or other files and data.
Peripheral – A generic term applied to printers, scan-
ners, mice, keyboards, serial ports, graphics cords, disk 
drives and other computer subsystems. This type of pe-
ripheral often relies on its own control software, known 
as a peripheral driver.
Port, hardware – A connection component (SCSI port, 
for example) that enables a microprocessor to commu-
nicate with a compatible peripheral.
Port, software – A memory address that identifies the 
physical circuit used to transfer information between a 
microprocessor and a peripheral.
RAM (Random Access Memory) – Generally referred 
to  as  a  computer’s  “memory.”  An  integrated  circuit 
memory chip that allows information to be stored and 
retrieved by a microprocessor or controller. The infor-
mation can be stored or accessed in any order, and all 
storage locations are equally accessible.
Seek Time – The amount of time (in thousandths of a 
second, or milliseconds) that it takes a hard drive’s read/
write head to move to a specific location on the disk. 
Average seek, then, is the average of a large number of 
random samplings all over the disk. Seek time is CPU 
independent, meaning that seek time is the same for a 
disk drive, whether it is attached to a computer or not.
Software – In a nutshell, software is a set of instruc-
tions  for  the  computer.  A  set  of  instructions  to  per-
form a particular task is called a program. There are two 
main types of software: system software (an operating 
system such as Mac OS or Windows) which controls 
the operation of the computer and application software 
(programs such as Word or Excel) which enable users 
to perform tasks such as word processing, spreadsheet 
creation, graphics, etc.
Storage – In computers, any equipment in which infor-
mation may be kept. PCs generally use disk units and 
other  external  storage  media  (diskettes,  CD-ROMs, 
magnetic disks, etc.) for permanent storage of informa-
tion.
Striping  –  Spreading  data  evenly  over  multiple  disk 
drives  to  enhance  performance.  Data  striping  can  be 
performed on a bit, byte or block basis for optimum ap-
plication performance.
Transfer Rate – The rate at which the drive sends and 
receives data from the controller. Transfer rates for read-
ing data from the disk drive may not be the same as the 
transfer rate for writing data to the disk drive. Transfer 
rates  are  CPU  dependent,  meaning  that  regardless  of 
how great a transfer rate your drive is capable of, the 
actual transfer rate can only be as fast as the slowest of 
your hard drive and computer.
Volume – A desktop mountable storage area, may be a 
partition of a hard drive, a removable disk or a cartridge. 
Typically measured in Megabytes or Gigabytes.
Utility  –  Software  designed  to  perform  maintenance 
tasks  on  the  system  or  its  components.  Examples  in-
clude backup programs, programs to retrieve files and 
data on disk, programs for preparing (or formatting) a 
disk or and resource editors.