Siemens E45 Guida Utente
81
System settings
7G_8G_HS_an_ ISDN-Basen / en / A31008-M1751-X101-2-7619 / settings_bs.fm / 15.10.2008
Changing the access code
Access codes are the first few digits required when dialling another city (national) or
another country (international). The default settings for Germany are as follows:
In other countries, different access codes could be used. In this case you will need to
change this setting.
Otherwise some calls, e. g. callbacks from the call lists, will not be possible
Otherwise some calls, e. g. callbacks from the call lists, will not be possible
Entering or changing the country code
Phone numbers transferred from the GSM network always include the international
access code (country code), even for calls within a country (e. g. +49 for Germany,
+33 for France, +39 for Italy or +43 for Austria).
A special setting for the country code is therefore necessary if you have received a call
A special setting for the country code is therefore necessary if you have received a call
from the GSM network, saved the number to your directory or caller list and then want
to call the number from the directory or caller list using the ISDN network.
Default: Country code for relevant country (e. g. +49 in Germany).
Default: Country code for relevant country (e. g. +49 in Germany).
0
For connections to other towns (national)
00
For connections abroad (international)
v
/
w
¢
Ð
¢
Base
¢
Settings
¢
ISDN settings
¢
Lg.-dist. code
s
National : 0
Select the type of access code, e. g. National : 0.
v
Open the submenu.
s
Change number
Select and confirm.
~
Í
Enter a new or changed access code and open
the menu.
s
Save entry
Select and confirm.
OK
OK
On base station:
SX303isdn
SX353isdn
v
/
w
¢
Ð
¢
Base
¢
Settings
¢
ISDN settings
¢
Lg.-dist. code
s
Code: 49
Select, e. g. 49 for Germany.
v
Open the submenu.
s
Change number
Select and confirm.
~
Í
Enter country code and open the menu.
s
Save entry
Select and confirm.
OK
OK