Roland FP-2 Manuale Proprietario
32
Chapter 2 Playing Along with Rhythms
Recording the Chord Progression
(Chord Progression)
You can save a chord progression you’ve specified using the left-hand
section of the keyboard.
section of the keyboard.
fig.02-15
1.
Hold down the [Chord Progression] button and press the
[Rec] button.
The [Chord Progression] and the [Rec] buttons’ indicator flashes in red, the
[Start/Stop] button’s indicator flashes in orange, and the FP-2 is put into
recording standby.
[Start/Stop] button’s indicator flashes in orange, and the FP-2 is put into
recording standby.
The “UCP (User Chord Progression)” appears in the display.
fig.02-16
2.
The chord is specified with a key in the left part of the
keyboard, and the Rhythm begins.
The chord being played is indicated in the display.
You can store up to sixteen chords.
3.
Recording stops when the performance exceeds eight
measures or when you press the [Start/Stop] button.
Changing the Stored Measure Count
You can change the number of measures recorded for the chord
progression. This is set to eight measures when the FP-2 is turned on.
progression. This is set to eight measures when the FP-2 is turned on.
Measure counts of “4/8/12/16” can be selected.
1.
Hold down the [Chord Progression] button and press the
[Rec] button.
The “UCP (User Chord Progression)” appears in the display.
2.
Press the [-] or [+] button to select measure counts.
3.
The chord is specified with a key in the left part of the
keyboard, and the Rhythm begins.
4.
Press the [Start/Stop] button to stop recording.
You can listen to a wide
variety of styles with a
favorite chord progression.
Refer to “Fixing a Set
Chord Progression” (p. 43).
variety of styles with a
favorite chord progression.
Refer to “Fixing a Set
Chord Progression” (p. 43).
3
1
Press the [Chord
Progression] button or the
[Rec] button to exit from
recording standby.
Progression] button or the
[Rec] button to exit from
recording standby.
Recorded chord
progression patterns are
progression patterns are
saved to “
.”
You can select “
”
patterns by pressing the [-]
button when pattern
number 1 is displayed.
button when pattern
number 1 is displayed.
NOTE
The song may not play
back correctly if the
performance is played with
a different beat than the
one used in recording the
original chord progression.
back correctly if the
performance is played with
a different beat than the
one used in recording the
original chord progression.
NOTE
You can store up to sixteen
chords. Regardless of the
number of measures set,
recording stops when the
seventeenth chord is
specified.
chords. Regardless of the
number of measures set,
recording stops when the
seventeenth chord is
specified.
The recorded chord
progression will be
discarded as soon as the
power is turned off. If you
want to keep it, you’ll need
to save the Setup (p. 33).
progression will be
discarded as soon as the
power is turned off. If you
want to keep it, you’ll need
to save the Setup (p. 33).
FP-2_e.book 32 ページ ２００６年５月１２日 金曜日 午後２時４１分