Roland FP-7 Guida Utente

 

Connecting Audio Equipment

 

By connecting audio equipment to the FP-7, you can listen to its sound from the speakers 
of your audio system, or listen to sound from your audio system via the FP-7’s speakers.
To make connections, use audio cables with 1/4” phone plugs.

 

Before connecting this unit to other devices, turn off the power to all units. This will help 
prevent malfunctions and/or damage to speakers or other devices.

Some connection cables contain resistors. Do not use cables that incorporate resistors 
for connecting to this unit. The use of such cables can cause the sound level to be 
extremely low, or impossible to hear. For information on cable specifications, contact 
the manufacturer of the cable.

 

If you’ll be playing the FP-7 in a larger space, such as in a concert, you can connect 
amplified speakers to make the sound louder.
Make connections as shown below.

 

fig.cnct-speaker1.eps

 

• Sound will still be heard from the FP-7’s internal speakers even if you connect external 

speakers.
If you don’t want to hear the internal speakers, turn the [Speaker] switch “Off” so that sound 
will be heard only from the external speakers.

• The FP-7 is designed so that when you connect headphones, the sound is optimized for 

listening through headphones. For this reason, the sound heard from speakers connected to 
the FP-7 will be different depending on whether or not headphones are connected.

* If you connect the FP-7 to an external device (such as an external speaker) in monaural, it 

may sound differently than when using a stereo connection.

FP-7-e.book 138 ページ ２００７年７月１２日　木曜日　午後３時４７分