Roland GW-8 Guida Utente
51
About V-LINK
Connecting the GW-8 to a V-LINK compatible image device
allows you to control the images with the GW-8.
allows you to control the images with the GW-8.
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
V-LINK
V-LINK (
) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily enjoy
performing a wide range of visual effects that are linked to the
expressive elements of a music performance.
two or more V-LINK compatible devices, you can easily enjoy
performing a wide range of visual effects that are linked to the
expressive elements of a music performance.
1.
Press [V-LINK] so the indicator is lit.
The V-LINK screen will appear, and the V-LINK setting will
be on.
be on.
Operations on the GW-8
By operating the GW-8’s keyboard and knobs, you can
control the image along with your performance on the
GW-8.
control the image along with your performance on the
GW-8.
• [0] (Clip Reset): Turns the image off (solid black).
• [1] (All Reset): Resets the effect applied to the image, and
• [1] (All Reset): Resets the effect applied to the image, and
restores all settings such as brightness and hue to their
default values.
default values.
• [2] (Setup): Accesses the V-LINK SETUP screen.
• Black keys: Switch tabs.
• White keys: Switch clips.
• ANALOG MODIFY knobs: Transmit the following control
• Black keys: Switch tabs.
• White keys: Switch clips.
• ANALOG MODIFY knobs: Transmit the following control
changes.
For details on the content that can be controlled by these
control changes, refer to the “D BEAM” settings in “V-LINK
SETUP Parameters,” below.
For details on the content that can be controlled by these
control changes, refer to the “D BEAM” settings in “V-LINK
SETUP Parameters,” below.
• D Beam controller: Controls the parameter specified in V-
LINK setup.
* When you turn V-LINK on, the settings in V-LINK setup will
take priority for D Beam operation.
2.
With the V-LINK screen shown, press [V-LINK] again.
The V-LINK button will go dark, and the V-LINK setting will
be off.
be off.
1.
Press [V-LINK] to access the V-LINK screen.
2.
Press [2] (Setup).
The V-LINK SETUP screen will appear.
3.
Use [
] [
] to move the cursor to the parameter you
want to edit.
4.
Use the VALUE dial to set the value.
5.
Press [EXIT] to return to the previous screen.
V-LINK SETUP Parameters
How to Use the V-LINK ([V-LINK])
[SELECT] indicator
Knob
Control Change No.
EFFECT
REVERB
CC91
CHORUS
CC93
FILTER
CUTOFF
CC74
RESONANCE
CC71
ENVELOPE
ATTACK
CC73
RELEASE
CC72
V-LINK Settings (V-LINK SETUP)
Parameter
Value
Explanation
Note Tx
Channel A
Channel A
1–16
Controls the V-
LINK device.
Specify the MIDI
channel. (*)
LINK device.
Specify the MIDI
channel. (*)
Note Tx
Channel B
Channel B
Note Tx
Channel C
Channel C
D BEAM
Assigns a V-LINK function to the
D Beam controller.
D Beam controller.
OFF
The operation
selected by D
BEAM buttons will
occur regardless
of whether V-LINK
is on or off.
selected by D
BEAM buttons will
occur regardless
of whether V-LINK
is on or off.
ColorEQ
Fore
Fore
CC01
(Modulation)
(Modulation)
Used with
motion
dive .tokyo
Performanc
e Package
motion
dive .tokyo
Performanc
e Package
ColorEQ
Back
Back
CC71
(Resonance)
(Resonance)
Scratch
SW
SW
CC03
Speed
Knob
Knob
CC08 (Balance)
Total
Fader
Fader
CC10 (Panpot)
Cross
Fader
Fader
CC11 (Expression)
GW-8_e.book 51 ページ ２００８年７月３０日 水曜日 午後２時４分