Roland fp-4 Guida Utente

 

Troubleshooting

 

If you think there’s a problem, read this first.

 

Is the power cord connected correctly?

 

Is Panel Lock activated?
Hold down the [Function] button and press the [Equalizer] button to turn off 
the Panel Lock function.

 

Is the pedal connected correctly? 
Plug the cord firmly into the pedal jack.

Are you using a pedal made by another manufacturer? 
Use the pedal included with the FP-4 or an optional DP Series or similar pedal.

—

Unplugging a pedal cord from the FP-4 while the power is on may cause the 
pedal’s effect to be applied nonstop. 
Be sure to switch off the power to the FP-4 before attempting to disconnect or 
connect a pedal cord.

—

If you’ve assigned the soft pedal or sostenuto pedal as a registration select 
switch, or assigned it to some other function, the pedal won’t operate as a 
soft pedal or sostenuto pedal.

p. 64
p. 82

 

Are the external devices connected to more than one AC power outlet? 
If you connect external devices, be sure to connect them to the same AC 
outlet.

—

 

Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.

—

 

Could the FP-4’s volume or the volume of the connected equipment be turned 
down?

Could headphones be connected?
Could there be a plug inserted in a headphone jack? 
The speakers will not produce sound if headphones or plug are connected to 
the headphone jacks.

Could the [Balance] knob be set all the way toward “Lower” or “Upper”?

Is the Speaker switch to “Off”?
Turn it on with the Speaker switch.

Is Local Off set to Off? 
When Local Control is set to Off, no sound is produced by playing the 
keyboard. Set Local Control to “On.”

FP-4-e.book 106 ページ ２００７年５月２４日　木曜日　午後７時１０分