Roland HP203 Guida Utente

 

Error Messages

 

* External Media: USB memory, Floppy Disk, CD-ROM, etc.

 

You can only read the music file. It can not be saved.

 

An error occurred during writing. 
The external media’s protect tab may be in the “Protect” (writing prohibited) position, or the external 
media may not yet be initialized.

 

No external media is inserted. Insert the external media and try again.

 

There is not sufficient free memory in the save destination. Either insert other external media or delete 
unneeded files and try again.

 

An error occurred during writing. The external media may be corrupted. Insert other external media 
and try again. Alternatively, you can initialize the external media.

 

The file is unreadable. The data format is not compatible with the HP203.

 

Data was not called up in time for playback of the song. After waiting several seconds, you may be 
able to play back the song by pressing the [

] button again.

 

This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio files.

 

The internal memory capacity of the HP203 is full.

 

The HP203 cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the 
amount of MIDI data sent to the HP203.

 

A MIDI cable has been disconnected. Connect it properly and securely.

 

A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.

 

There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved 
after you have tried several times, contact the Roland service center.

 

The External Memory port was subjected to excessive current. Make sure that there is no problem 
with the external media, then turn the power off, then on again.

HP203_e.book 87 ページ ２００７年７月１７日　火曜日　午前１０時４６分