Roland RD-700GX Guida Utente

Pagina di 216
 
27
 
Getting Ready
 
You can copy Setup files and song files to separately sold USB memory for safekeeping.
You can also play back SMF music files that’s saved on USB memory (p. 58), or play audio files 
from USB memory (p. 70).
 
You can also use a separately sold floppy disk drive to copy data to a floppy disk. For details, 
refer to the owner’s manual of your floppy disk drive.
Use USB memory and floppy disk drive available from Roland. Proper operation cannot be 
guaranteed if other USB device is used.
 
1.
 
Connect your USB memory to the USB MEMORY connector located on the RD-700GX’s 
rear panel.
 
Carefully insert the USB memory all the way in—until it is firmly in place.
If you’re using new USB memory, you must first initialize (format) it on the RD-700GX. 
For details, refer to “Formatting Memory (Format)” (p. 125).
You can also connect a commercially available CD drive or floppy disk drive (sold separately) 
to the USB MEMORY connector.
 
Using the USB Memory
 
Connecting the USB Memory
NOTE
Rear Panel
RD-700GX_e.book 27 ページ 2008年2月13日 水曜日 午後5時49分