Roland RD-700GX Guida Utente
61
Using the Convenient Functions in Performances
In addition to chorus (p. 49) and reverb (p. 48), the RD-700GX also allows you to apply
“multi-effects” to sounds. Multi-effects provides a collection of 124 different effects, such
as distortion and rotary, from which you can choose.
You can simultaneously use two multi-effects for each zone; they are referred to as MFX1
and MFX2.
The factory settings have a suitable effect assigned to each of the tones.
“multi-effects” to sounds. Multi-effects provides a collection of 124 different effects, such
as distortion and rotary, from which you can choose.
You can simultaneously use two multi-effects for each zone; they are referred to as MFX1
and MFX2.
The factory settings have a suitable effect assigned to each of the tones.
fig.Q2-10p
1.
Press the MULTI-EFFECTS 1 [ON/OFF] button or the MULTI-EFFECTS 2 [ON/OFF] button,
getting its indicator to light.
getting its indicator to light.
2.
Adjust the amount of multi-effect applied with the MULTI-EFFECTS 1 [CONTROL] knob or
the MULTI-EFFECTS 2 [CONTROL] knob.
the MULTI-EFFECTS 2 [CONTROL] knob.
3.
To cancel the multi-effect, press the MULTI-EFFECTS 1 [ON/OFF] button or the MULTI-
EFFECTS 2 [ON/OFF] button, the indicator light goes out.
EFFECTS 2 [ON/OFF] button, the indicator light goes out.
The allowable values adjusted with the MULTI-EFFECTS 1 [CONTROL] knob and the
MULTI-EFFECTS 2 [CONTROL] knob vary with the selected effect.
Refer to MFX Control of each effect in “Effect/Parameter List” (p. 154).
MULTI-EFFECTS 2 [CONTROL] knob vary with the selected effect.
Refer to MFX Control of each effect in “Effect/Parameter List” (p. 154).
Effects are not applied to Tones for which the TONE INFO MFX 1/MFX 2 settings are
set to “0 THRU” (p. 89).
set to “0 THRU” (p. 89).
Effects marked by an asterisk “*” in the “Effect/Parameter List” (p. 154) are used
when you select sounds of the SRX wave expansion series.
when you select sounds of the SRX wave expansion series.
You can switch the multi-effect on/off and adjust its depth for the tone of the currently
selected zone. By switching zones, you can adjust the tone settings for each zone.
selected zone. By switching zones, you can adjust the tone settings for each zone.
Applying Effects to the Sound (MULTI-EFFECTS)
You can change a variety of Multi-effects settings beyond just the Multi-effects type by
holding down the [EXIT/SHIFT] button and pressing the MULTI-EFFECTS 1 [ON/OFF]
button or the MULTI-EFFECTS 2 [ON/OFF] button.
holding down the [EXIT/SHIFT] button and pressing the MULTI-EFFECTS 1 [ON/OFF]
button or the MULTI-EFFECTS 2 [ON/OFF] button.
NOTE
RD-700GX_e.book 61 ページ 2008年2月13日 水曜日 午後5時49分