Roland RD-700GX Guida Utente

 

Using the RD-700GX As a Master Keyboard

 

When you have finished connecting the external MIDI device, match the keyboard’s 
Transmit channel and the Receive channel for each of the external MIDI sound 
generator’s Parts. Sounds is produced when the MIDI channels for the sending device 
(the RD-700GX) and the receiving device (the external MIDI sound generator) are set to 
the same MIDI channel.

 

The EXTERNAL screen appears.
If “Ch” doesn’t appear on screen, press the Cursor [

] button several times to display the 

following screen.

 

fig.Q3-03g

 

For instructions on setting each of the external MIDI sound generator’s Part’s Receive 
channel, refer to the owner’s manual for each device.

 

When Rec Mode is set to ON in the Utility Rec Setting in Edit mode, the EXTERNAL 
screen as shown above is not displayed. Set Rec Mode to OFF when setting the MIDI 
Transmit channel (p. 138).

Part names for Zones in which ZONE SWITCH (p. 46) is set to OFF appear in the 
display in lowercase letters, such as “up1,” “up2,” “lw1,” and “lw2.” 

 

MIDI messages 

for 

 

Zones

 

 with the ZONE SWITCH set to OFF are not transmitted.

 

Ch 
(MIDI OUT Channel)

1–16

RD-700GX 
performance data is 
sent over a selected 
channel.

RD-700GX_e.book 98 ページ ２００８年２月１３日　水曜日　午後５時４９分