Roland RD-300SX Manuale Proprietario
43
Settings for Each Function ([EDIT])
The Pan setting localizes the sound image of each part when the
output is in stereo. With an increase in the value for L, more of the
sound will be heard as coming from the left side. Similarly, more of
the sound will originate at the right if the value of R is increased.
When set to 0, the sound is heard as coming from the center.
output is in stereo. With an increase in the value for L, more of the
sound will be heard as coming from the left side. Similarly, more of
the sound will originate at the right if the value of R is increased.
When set to 0, the sound is heard as coming from the center.
These settings determine whether each individual part is controlled
(ON), or not (OFF) by the pedals connected to each PEDAL jack
(DAMPER, CONTROL), the Modulation lever, and the Bender.
(ON), or not (OFF) by the pedals connected to each PEDAL jack
(DAMPER, CONTROL), the Modulation lever, and the Bender.
You can choose whether or not to have messages from external MIDI
devices be received by each individual part.
devices be received by each individual part.
1.
Press [EDIT].
The indicator lights, and the RD-300SX switches to Edit mode.
2.
Press [INC] or [DEC] to select “Part,” then press [ENTER].
fig.disp.Prt
3.
Referring to the following, press the TONE SELECT button
to which the part number you want to change is assigned.
to which the part number you want to change is assigned.
Press [LOWER SELECT] so that the indicator lights to select
Part 9–16.
Part 9–16.
The channel number appears in the display while the button is
held down. When the button is released, the status of the
channel (on/off) is shown in the display.
held down. When the button is released, the status of the
channel (on/off) is shown in the display.
4.
Press [INC] or [DEC] to switch the setting to ON or OFF.
The indicator for the currently selected part flashes, while the
indicator for a part that is ON lights steadily.
indicator for a part that is ON lights steadily.
5.
Press [EDIT] to turn off the indicator and quit editing.
You can return to Step 2 by pressing [EXIT].
On the RD-300SX, UPPER is fixed as Part 1 (Ch 1), while
LOWER is fixed as Part 2 (Ch 2). Note that the keyboard won’t
produce sound if Parts 1 and 2 are set to OFF.
LOWER is fixed as Part 2 (Ch 2). Note that the keyboard won’t
produce sound if Parts 1 and 2 are set to OFF.
Changing the pitch of the tone in
semitone steps (Key Transpose)
Value
-48—0— 48
Setting the Pan
Value
L64–0–R63
Turning Each Controller On and Off
Parameter
Value
Damper Pedal Switch
OFF, ON
Control Pedal Switch
Pitch Bender Switch
Modulation Switch
Pitch Bender Switch
Modulation Switch
Part On/Off (Part)
TONE SELECT
button
button
Part
LOWER SELECT=OFF
Part
LOWER SELECT=ON
PIANO
1
9
E.PIANO
2
10
ORGAN
3
11
STRINGS/PAD
4
12
GUITAR/BASS
5
13
BRASS/WINDS
6
14
VOICE/SYNTH
7
15
RHY/GM2
8
16
RD-300SX_e.book 43 ページ ２００５年１２月２６日 月曜日 午後８時３７分