Roland RD-300SX Manuale Proprietario

 

By setting the MIDI Tx Mode, you can select to have a more suitable 
(to the external MIDI device) selection of MIDI data be output from 
the RD-300SX when you make tone changes on the RD-300SX. 

“Mode 1” is the power-up default setting.

 

The MIDI Tx button is disabled in Mode 2.

When connecting a MIDI sequencer, set Local Control to “Off.”

When the instrument is turned on, this is set to “On.”

As illustrated, information describing what has been played on the 
keyboard is passed to the internal sound generator over two 
different routes, (1) and (2). As a result, you hear overlapping or 
intermittent sounds. To prevent this from happening, route (1) must 
be severed, by setting the unit to what is known as “Local Off.”

 

fig.03-02

 

 The keyboard and the internal sound generator 

are in a linked state.

 

fig.03-03

 

The keyboard and the internal sound generator 
are in an unlinked state. No sound will be 
produced by the keyboard when it is played.

 

fig.03-04

 

Mode1

This setting is suited for con-
necting to a sound module. The 
MIDI information (for exam-
ple: Program change) is not 
output from the RD-300SX 
when you make a tone change 
on the RD-300SX.

Mode2

This setting is suitable for the 
connection of sequencers. The 
MIDI information (for example: 
Bank select, Program Change, 
Settings of Effects, and so on) is 
output from the RD-300SX 
when you make a tone change 
on the RD-300SX. 

 

OFF

ON

(1)

MIDI

MIDI

MIDI

MIDI

(2)

IN

IN

OUT

OUT

Sequencer

Memory

Sound 

Generator

Each note played

is sounded twice

Thru function On

Local On

Local On

Sound is emitted

Sound Generator

Local Off

No sound produced

Sound Generator

RD-300SX_e.book 46 ページ ２００５年１２月２６日　月曜日　午後８時３７分