Roland pc-50 Manuale Utente

 

Getting Connected and Installing Drivers (Macintosh)

 

 

 

■

 

 

 to the 

 

 position.

 

Use the USB cable to connect the PC-50 to your computer.

 

Set the PC-50’s power switch to the 

 

 position.

 

Use the USB cable to connect the PC-50 to your computer.

 

Set the PC-50’s 

 

 to the 

 

 position.

 

fig.3-3

 

From the CD-ROM, drag the 

 

 - 

 

 folder into the 

 

 - 

 

 folder on the hard disk of your Macintosh 

to copy it there.

 

fig.3-4

 

In the 

 

 - 

 

 folder where you 

installed OMS, double-click 

 

 to start it up.

 

fig.3-5_35

 

If a dialog box like the one shown 
here appears, click 

 

. A 

 

 dialog box will then 

appear, so click 

 

.

 

fig.3-6_35

 

The 

 

 

dialog box will appear. Click 

 

.

If you accidentally clicked 

 

, click 

 

 in the next screen.

Once the connections have 
been completed, turn on 
power to your various 
devices in the order 
specified. By turning on 
devices in the wrong 
order, you risk causing 
malfunction and/or 
damage to speakers and 
other devices.

This unit is equipped with 
a protection circuit. A brief 
interval (a few seconds) 
after power up is required 
before the unit will operate 
normally.

If you are using the PC-50 
in conjunction with other 
MIDI devices, make 
settings as described in 
Readme_E.htm

 located in 

the Driver E (Mac OS 9,8) 
folder of the CD-ROM.

We recommend that you 
turn off AppleTalk, by 
selecting Chooser from the 
Apple menu.

PC-50_e.book 32 ページ ２００５年１１月１０日　木曜日　午前１０時３３分