Roland pc-50 Manuale Utente
61
System settings
fig.util*
1
Simultaneously hold the
[MIDI CH]
button and
[PGM CHANGE]
button down.
The display will indicate “UTL,” and the PC-50 enters UTILITY
mode.
mode.
fig.sy0
2
Press the
[SYSTEM]
key.
The display will indicate “SY0” and blink.
fig.enter
3
Use the
VALUE encoder
or the
[0]
–
[9]
keys to specify the System setting that
you want to set, and then press the
[ENTER]
button.
* The setting will be cancelled if you press another button instead of the
[ENTER]
button.
Confirm what’s indicated and use the appropriate method to make the setting.
Set the system settings
Display
Mode
Key-
board
Content of the setting
Default
Setting
method
F8 CLOCK
ON/OFF
ON/OFF
0
Specify whether F8 Clock is to be transmitted.
OFF
F8 CLOCK
DEFAULT
TEMPO
DEFAULT
TEMPO
1
If “F8 CLOCK ON/OFF” is ON, specify the default value
of the F8 Clock. After the power is turned on, this tempo
will continue to be output until you move a controller to
which TEMPO is assigned.
of the F8 Clock. After the power is turned on, this tempo
will continue to be output until you move a controller to
which TEMPO is assigned.
120
VELOCITY
CURVE
CURVE
2
When you play the keyboard of the PC-50, note messages
will be transmitted with a velocity value that corresponds
to your playing strength. By setting the VELOCITY
CURVE, you can modify the keyboard’s sensitivity and the
curve that is followed when the velocity value changes.
will be transmitted with a velocity value that corresponds
to your playing strength. By setting the VELOCITY
CURVE, you can modify the keyboard’s sensitivity and the
curve that is followed when the velocity value changes.
1-MEDIUM
KEY
VELOCITY
VELOCITY
3
Specify whether the transmitted velocity value will vary
according to the keyboard sensitivity and curve you select-
ed in “VELOCITY CURVE”, or will always be transmitted
at a fixed value.
according to the keyboard sensitivity and curve you select-
ed in “VELOCITY CURVE”, or will always be transmitted
at a fixed value.
TOUCH
MIDI I/F
MODE
MODE
4
Specify whether the PC-50 will function as a MIDI interface
using its MIDI connectors.
using its MIDI connectors.
ON
VALUE
ENCODER
ENCODER
5
Select the parameter that is transmitted by the VALUE en-
coder.
coder.
VOLUME
FACTORY
RESET
RESET
6
Restore all settings of the PC-50 to their factory-set condi-
tion.
tion.
-
PC-50_e.book 61 ページ 2005年11月10日 木曜日 午前10時33分