Apex drx-9200 Guida Alla Connessione
ANTENNA
IN
TV
OUT
COAXIAL
OUTPUT
S-VIDEO
VIDEO-OUT
AUDIO
L
R
P-SCAN
Pr Y Pb
r
Pr
Y
Pb
The following diagrams will show you how to connect your DVD Recorder to your stereo TV using
Composite or S-Video connections. For more detailed instructions, refer to the Quick Connection Guide
Composite or S-Video connections. For more detailed instructions, refer to the Quick Connection Guide
Before operating, you must set the clock and television tuner on the DRX-9200.
Do not connect the DVD player to a VCR or TV/VCR combination unit. Playback through these units
may be distorted due to the Macrovision copyright protection circuitry in all DVD devices.
may be distorted due to the Macrovision copyright protection circuitry in all DVD devices.
If your TV has an RF input only, you’ll need to purchase an optional RF Modulator. See your local con-
sumer electronics retailer or shop online at www.apexdigitalinc.com under Accessory Store.
sumer electronics retailer or shop online at www.apexdigitalinc.com under Accessory Store.
Connecting to a TV using Audio / Video Input
come
play
with us
Composite Video, with Stereo Audio. Connect yellow to Video Out; connect red to Audio Out
“R” and white to Audio Out “L”, as shown above.
“R” and white to Audio Out “L”, as shown above.
S-video (optional) provides better video than composite. Check your TV for compatibility
before proceeding. Connect S-Video cable to S-Video Out; connect red to Audio Out “R” and
white to Audio Out “L”, as shown above. Note: Yellow video cable must be completely dis-
connected.
before proceeding. Connect S-Video cable to S-Video Out; connect red to Audio Out “R” and
white to Audio Out “L”, as shown above. Note: Yellow video cable must be completely dis-
connected.
Component video cables (not included) provide the best quailty picture. Refer to the Quick
Connection Guide.
Connection Guide.
Note: The audio / video cables shown below are only examples. For best results, we recommend using the best connections available
on your equipment.
on your equipment.
Setting the Clock
IMPORTANT NOTICE
1. Turn off power and unplug all units before connecting.
1. Turn off power and unplug all units before connecting.
2. Use this guide for reference only. This is a sampling of the cables you can use to
connect your DVD recorder.
connect your DVD recorder.
Composite cables
(included)
(included)
RF Coaxial cable
(not included)
(not included)
S-Video cable
(not included)
(not included)
IEEE 1394 cable
(not included)
(not included)
Cables
Press SETUP to access the SETUP Menu.
Using the UP/DOWN keys, highlight SCHEDULE and press to enter the SCHEDULE sub-
menu.
menu.
Using the UP/DOWN keys, highlight DATE TIME and press .
Using LEFT/RIGHT to move between fields, and UP/DOWN to change the numbers, set the hours
and minutes. After selecting minutes, press RIGHT twice to get to the DATE field.
and minutes. After selecting minutes, press RIGHT twice to get to the DATE field.
Using LEFT/RIGHT to move between fields, and UP/DOWN to change the numbers, set the month,
day, and year. Press when finished.
day, and year. Press when finished.
Press SETUP to exit the SETUP menu.
1
2
3
4
5
6
Setting the Tuner
Press SETUP to access the SETUP Menu.
Using the UP/DOWN keys, highlight CHANNEL and press to enter the CHANNEL sub-
menu.
menu.
Using the UP/DOWN keys, highlight CABLE/ANTENNA and press .
Choose your signal source - either cable or over-the-air antenna. When finished, press LEFT ARROW
to return to the CHANNEL sub-menu.
to return to the CHANNEL sub-menu.
Using the UP/DOWN keys, highlight CHANNEL SEARCH and press Then, highlight
CONFIRM and press .
CONFIRM and press .
1
2
3
4
5
6
Back of DRX9200
Verify you have selected the same input
source (Video 1, etc) on your TV that corre-
sponds to your DVD Recorder connection.
source (Video 1, etc) on your TV that corre-
sponds to your DVD Recorder connection.
GOOD (shown)
BETTER (shown)
BEST(not shown)
Connecting your DRX-9200 DVD+RW Recorder to your TV
Connecting Your DRX-9200
Component cables
(not included)
(not included)
When the CHANNEL SEARCH is finished, press the
SETUP key to save your settings and exit SETUP.
SETUP key to save your settings and exit SETUP.
/
/
/
/
/
/
/