Rollei Dk4010 Guida Utente
GB-138
Viewing Still Images | Viewing Movies | [o] Viewing Images Automatically as a Slideshow (slideshow) | [O] Viewing Multiple Images | [INFORMATION] Viewing Image Information | [J]/[I] Erasing Unwanted
Images | [U] Protecting Images from Accidental Erasing (PROTECT) | [p] Adding Voice Messages to Still Images (POSTRECORDING) | [V] Resizing and Trimming Images (RESIZE) | [W] Rotating an Image |
[T] Using DPOF to specify print settings | [G] Printing by Connecting the Camera Directly to a Printer (PictBridge) |
Images | [U] Protecting Images from Accidental Erasing (PROTECT) | [p] Adding Voice Messages to Still Images (POSTRECORDING) | [V] Resizing and Trimming Images (RESIZE) | [W] Rotating an Image |
[T] Using DPOF to specify print settings | [G] Printing by Connecting the Camera Directly to a Printer (PictBridge) |
Viewing images on a Windows PC
1
Insert the memory card into the camera.
(Æ p.21)
2
Load batteries into the camera.
3
Connect the camera to your PC using the USB cable provided
and then start up the PC.
A
Important
• If you are using Windows 98 or Windows 98SE, install the USB drivers before
connecting the USB cable. (Æ p.136)
• If you are using Windows Me, Windows 2000 or Windows XP, no USB driver installation
is needed. Connect the USB cable without installing the drivers.
• To view images on your PC, you must have image-viewing software already installed.
(To play movies, QuickTime 4.1 or later must be installed.)
A
Important
You cannot check images on your PC unless there
is a memory card in the camera.
is a memory card in the camera.
A
Important
Check the size of the USB connectors. Plug the small connector into the camera and
the large connector into the USB port on your PC.
the large connector into the USB port on your PC.