Rollei Dk4010 Guida Utente
GB-153
Function Settings | [BEEP] Adjusting the Volume of the Camera Button Beep | [SHUTTER VOL] Adjusting the Volume of the Shutter Sound | [SELECT LCD] Selecting the Display Used at Startup | [START
SCREEN] Selecting the Startup Screen | [
SCREEN] Selecting the Startup Screen | [
ZLANGUAGE] Selecting the Menu Language | [VIDEO OUT] Setting the Output Format for a TV Connection | [FILE NO.] Starting Image File Numbers from 0001 |
[POWER SAVE] Having the Camera Turn Off Automatically to Save Power
Forgetting to turn the camera off can cause the camera's battery charge to
fall to a low level. For this reason, the camera features a Power Save
function that automatically turns the camera off after several minutes if it is
left turned on. When you activate the Power Save function, the camera
automatically enters sleep mode after several minutes and then turns off
two minutes later. In sleep mode, the electronic viewfinder and LCD
monitor go blank but the camera is not turned off.
The procedure below shows how to specify the delay until the camera is
turned off.
fall to a low level. For this reason, the camera features a Power Save
function that automatically turns the camera off after several minutes if it is
left turned on. When you activate the Power Save function, the camera
automatically enters sleep mode after several minutes and then turns off
two minutes later. In sleep mode, the electronic viewfinder and LCD
monitor go blank but the camera is not turned off.
The procedure below shows how to specify the delay until the camera is
turned off.
1
Set the mode select dial to "G" and
turn the camera on.
2
Press the up u or down d button to
select [POWER SAVE] and then press the
right button r.
AF MODE
BRIGHT CNTRL
DATE
DIGITAL ZOOM
FORMAT
BRIGHT CNTRL
DATE
DIGITAL ZOOM
FORMAT
SAF
STANDARD
2004.01.01
ON
EXECUTE
STANDARD
2004.01.01
ON
EXECUTE
POWER SAVE
3MIN.
SET UP(1/3)