Rollei Dk4010 Guida Utente
GB-41
| Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto) | Using Flash | Adjusting Brightness | Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality | Adjusting Image
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
6
Press the MENU button K.
The P icon appears on the LCD monitor.
[N] Setting the Frame Rate for Movies (frames per
second)
«Applicable mode:
M»
The frame rate refers to the number of frames shot per second in a movie.
The available frame rate settings are 30 frames per second [30fps] and 15
frames per second [15fps].
Movement in movies with a frame rate of 30 fps is smooth, but the available
shooting time for 30 fps movies is shorter than for movies shot at 15 fps.
The available frame rate settings are 30 frames per second [30fps] and 15
frames per second [15fps].
Movement in movies with a frame rate of 30 fps is smooth, but the available
shooting time for 30 fps movies is shorter than for movies shot at 15 fps.
1
Set the mode select dial to "M" and turn
the camera on.
2
Press the MENU button K to display the menu icons.
3
Use the left l or right r button to select
[FRAME/SEC] N and then press the OK
button E.
A
Important
This setting is retained when you turn the camera off.
A
Important
Remove the lens cap before turning the camera on.
FRAME/SEC