Rollei Dk4010 Guida Utente
GB-53
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto) |
Telephoto) |
| Adjusting Brightness | Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality | Adjusting Image
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
[i] Fill-Flash with Red-eye Reduction
(*Only when a long exposure or shutter-priority is set.)
This mode can only be set for long exposures (Æ p.63) or when shutter-priority is selected as the AE mode (Æ
p.59). Regardless of the ambient light conditions, the flash fires once just before shooting and a second time
when the shot is taken to reduce red-eye.
p.59). Regardless of the ambient light conditions, the flash fires once just before shooting and a second time
when the shot is taken to reduce red-eye.
Setting the Flash Mode
In "C", "N" or "S"
1
Set the mode select dial to "C", "N" or "S" and turn the
camera on.
2
Press the flash pop-up lever Q.
The flash pops up.
3
Press the up button u to select the icon
for the mode you want to set.
The flash mode icon changes in the cycle shown below each time you
press the up button
press the up button
u.
A
Important
Remove the lens cap before turning the camera on.
B
Note
Close the flash by pressing it back down with your
finger.
finger.
B
Note
When Flash Off mode is used, the flash does not
need to pop up.
need to pop up.
(default)