Enterasys csx150 Guida Utente
Small Office Remote Access Switch 513
S
YSTEM
C
OMMANDS
Frame Relay Commands
ip addrpool
Displays the current IP address pool. Refer to the
ip addrpool
command description under
.
F
RAME
R
ELAY
C
OMMANDS
The following commands are used to display information concerning both the status and traffic
statistics of a particular frame relay connection.
statistics of a particular frame relay connection.
fr a <access n>
Sets an internal variable. The frame relay
<access n>
will be the assumed current access for
all subsequent frame relay system console commands entered. <Access n> will remain the
current access, until it is changed through issuing another
current access, until it is changed through issuing another
fr a <access n>
command. The
<access n> is the access index that is assigned to each frame relay access during the frame relay
access configuration.
access configuration.
Note that this command may be used in conjunction with all other
fr
commands. For example,
fr a 1 lmi
would be a valid command, changing the frame relay access to 1 before
displaying information relating to the LMI link.
fr d <DLCI m>
Sets an internal variable.
<DLCI m>
will be the default DLCI under the currently-selected
access, and therefore the assumed context for all subsequent frame relay system console
commands entered. <DLCI m> will remain the default DLCI until the default is changed
through reissuing the
commands entered. <DLCI m> will remain the default DLCI until the default is changed
through reissuing the
fr d <DLCI m>
command. The DLCI value is provided by the service
provider at line subscription time.
For the following frame relay commands, information is displayed for the currently selected access.
However, you may also change the access (which, in turn, changes the default) by using these
commands along with the access index command. Refer to the
However, you may also change the access (which, in turn, changes the default) by using these
commands along with the access index command. Refer to the
fr a <access n>
command.
fr display
Displays the configuration information as entered during the last CFGEDIT session for the
currently-selected frame relay access. Note that this also includes any configured PVCs
associated with this access.
currently-selected frame relay access. Note that this also includes any configured PVCs
associated with this access.
fr stats
Displays the statistics associated with the currently-selected access and DLCI. Refer to
, for a list of available statistics and their definitions.
fr clear
Clears the statistics counters associated with the
fr stat
command for the currently selected
access and DLCI.
fr clearall
Clears all statistics associated with the
fr stat
command.
fr lmi
Displays information relating to the LMI link on the currently-selected frame relay access, if
that access has the layer Management Interface enabled. The following list describes the fields
displayed when the FR LMI command is entered.
that access has the layer Management Interface enabled. The following list describes the fields
displayed when the FR LMI command is entered.