Enterasys micrommac 22es Guida Utente
Chapter 10: Bridge Statistics Screen
Page 10-4
MicroMMAC Local Management User’s Guide
10.2 SELECTING AN UPDATE-FREQ
The MicroMMAC updates the Bridge Statistics screen every three
seconds by default. The UPDATE-FREQ command allows you to adjust
the frequency in intervals of 3 seconds. The maximum update frequency
is 99 seconds.
seconds by default. The UPDATE-FREQ command allows you to adjust
the frequency in intervals of 3 seconds. The maximum update frequency
is 99 seconds.
To adjust the UPDATE-FREQ, perform the following steps:
1. Use the arrow keys to highlight the UPDATE-FREQ command field.
2. Press SHIFT-[+/=] or [–] until the desired time/frequency appears (this
number increments/decrements in 3 second intervals with a minimum
of 3 seconds and a maximum of 99 seconds).
of 3 seconds and a maximum of 99 seconds).
3. Press ENTER.
10.3 SELECTING AN INTERFACE/MODULE/PORT
When the Bridge Statistics screen first appears, statistics are displayed for
Interface 1, Module 1 and Port 1. To view statistics for another interface,
module, and port, use the INTERFACE X, MODULE X, or PORT X
commands at the bottom of the screen.
Interface 1, Module 1 and Port 1. To view statistics for another interface,
module, and port, use the INTERFACE X, MODULE X, or PORT X
commands at the bottom of the screen.
To select an interface, module, or port, perform the following steps:
1. Use the arrow keys to highlight the INTERFACE X, MODULE X, or
PORT X command field.
2. Press SHIFT-[+/=] or [–] until the desired interface, module, or port
appears.
3. Press ENTER. Statistics associated with the selected interface,
module, or port appear.