Smeg sto905u Guida Utente
Rev 0.0
9
USER INSTRUCTIONS
EN
Only run the soak program with half loads.
The multi-zone option (ref. 9 fi g. 2-02) is available for all programs, except
soak.
To run programs 6, 7, 8, 9, 10 (see tab. 2-02b), select the required standard
program (see programs 1, 2, 3, 4, 5 in tab. 2-02a) and then press the supple-
mentary program button (ref. 6 fi g. 2-02).
After using the above tables to choose the most suitable washing cycle, pro-
gram the appliance.
The multi-zone option (ref. 9 fi g. 2-02) is available for all programs, except
soak.
To run programs 6, 7, 8, 9, 10 (see tab. 2-02b), select the required standard
program (see programs 1, 2, 3, 4, 5 in tab. 2-02a) and then press the supple-
mentary program button (ref. 6 fi g. 2-02).
After using the above tables to choose the most suitable washing cycle, pro-
gram the appliance.
Before starting a washing program, make sure that:
The water supply tap is open.
There is regenerating salt in the water softener tank (to add
salt, see the instructions in the general manual).
The correct amount of detergent has been added to the dis-
penser (to add detergent, see the instructions in the general
manual).
The spray arms are able to rotate freely and without obstruction.
The racks have been correctly loaded (see the instructions in the
general manual).
There is regenerating salt in the water softener tank (to add
salt, see the instructions in the general manual).
The correct amount of detergent has been added to the dis-
penser (to add detergent, see the instructions in the general
manual).
The spray arms are able to rotate freely and without obstruction.
The racks have been correctly loaded (see the instructions in the
general manual).
The dishwasher door is securely closed.
2.2.1 Switching
on
Press the on/off button (ref. 1 fi g. 2-02) to start the dishwasher. Then wait for
one of the program indicator lights to turn on (ref. 2 fi g. 2-02).
one of the program indicator lights to turn on (ref. 2 fi g. 2-02).
2.2.2
Selecting and starting the program
Press the program selection button (ref. 3 fi g. 2-02) several times until
the indicator light corresponding to the required program turns on (ref. 2 fi g.
2-02);
if required, press the relative buttons to select any complementary functions
(e.g.: “half-load”, “program delay”; see para 2.2.7 “options”);
close the door; the program will start after about 2 seconds and the relative
indicator light will fl ash throughout the cycle (program¬ running signal).
the indicator light corresponding to the required program turns on (ref. 2 fi g.
2-02);
if required, press the relative buttons to select any complementary functions
(e.g.: “half-load”, “program delay”; see para 2.2.7 “options”);
close the door; the program will start after about 2 seconds and the relative
indicator light will fl ash throughout the cycle (program¬ running signal).
If the door of the dishwasher has not been closed or has been incor-
rectly closed, the washing cycle will not begin.
rectly closed, the washing cycle will not begin.
•
•
•
•
•
•
•
•
•
•
•