Smeg sto905u Guida Utente
Rev 0.0
13
INSTALLATION INSTRUCTIONS
EN
CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE
MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE AP-
PLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR.
MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE AP-
PLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT
REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECH-
NICAL SERVICE CENTRE.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNC-
TION OF FAULT, THE EARTH REDUCES THE RISK OF ELECTRO-
CUTION BY PROVIDING THE ELECTRICAL CURRENT WITH AN
ALTERNATIVE, LESS RESISTANT PATH.
REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECH-
NICAL SERVICE CENTRE.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNC-
TION OF FAULT, THE EARTH REDUCES THE RISK OF ELECTRO-
CUTION BY PROVIDING THE ELECTRICAL CURRENT WITH AN
ALTERNATIVE, LESS RESISTANT PATH.
BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT
THE MAINS POWER SUPPLY FROM THE WORK AREA.
THE MAINS POWER SUPPLY FROM THE WORK AREA.
CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTAL-
LATION COMPLIES WITH THE REGULATIONS IN FORCE IN THE
COUNTRY OF USE, AND THAT IT IS CORRECTLY EARTHED.
LATION COMPLIES WITH THE REGULATIONS IN FORCE IN THE
COUNTRY OF USE, AND THAT IT IS CORRECTLY EARTHED.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNC-
TION OF FAULT, THE EARTH REDUCES THE RISK OF ELECTRO-
CUTION BY PROVIDING THE ELECTRICAL CURRENT WITH AN
ALTERNATIVE, LESS RESISTANT PATH. THIS APPLIANCE IS FIT-
TED WITH A SUPPLY CORD CONTAINING AN EARTH WIRE AND
PLUG. FIT THE PLUG INTO A SUITABLE SOCKET, INSTALLED
AND EARTHED IN COMPLIANCE WITH THE LAWS IN FORCE IN
THE COUNTRY OF INSTALLATION.
TION OF FAULT, THE EARTH REDUCES THE RISK OF ELECTRO-
CUTION BY PROVIDING THE ELECTRICAL CURRENT WITH AN
ALTERNATIVE, LESS RESISTANT PATH. THIS APPLIANCE IS FIT-
TED WITH A SUPPLY CORD CONTAINING AN EARTH WIRE AND
PLUG. FIT THE PLUG INTO A SUITABLE SOCKET, INSTALLED
AND EARTHED IN COMPLIANCE WITH THE LAWS IN FORCE IN
THE COUNTRY OF INSTALLATION.
AN INCORRECTLY CONNECTED EARTH WIRE MAY GENERATE
THE RISK OF ELECTROCUTION. IF IN DOUBT AS TO THE COR-
RECT EARTHING OF THE APPLIANCE, CALL IN A QUALIFIED
ELECTRICIAN OR THE TECHNICAL ASSISTANCE SERVICE. DO
NOT CHANGE THE PLUG ATTACHED TO THE APPLIANCE. IF THE
PLUG IS NOT SUITABLE FOR THE SOCKET, CALL IN A QUALIFIED
ELECTRICIAN TO FIT A SUITABLE PLUG.
THE RISK OF ELECTROCUTION. IF IN DOUBT AS TO THE COR-
RECT EARTHING OF THE APPLIANCE, CALL IN A QUALIFIED
ELECTRICIAN OR THE TECHNICAL ASSISTANCE SERVICE. DO
NOT CHANGE THE PLUG ATTACHED TO THE APPLIANCE. IF THE
PLUG IS NOT SUITABLE FOR THE SOCKET, CALL IN A QUALIFIED
ELECTRICIAN TO FIT A SUITABLE PLUG.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT RE-
PLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNI-
CAL SERVICE CENTRE IN ORDER TO AVOID ANY RISK.
PLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNI-
CAL SERVICE CENTRE IN ORDER TO AVOID ANY RISK.