Smeg pla8743xu Manuale Utente

Rev 0.0

 21

  The dishwasher is fi tted with a diagnostics system which detects and signals 
certain types of malfunctions.

  

The anti-fl ooding system has tripped (only for models fi tted with this feature). 
Activates in case of water leaks. Contact the technical assistance service.

The system limiting the water level in the dishwasher has tripped. Interrupt the 
current program. Switch off the dishwasher, switch it back on again, program 
a new cycle and press start. If the problem persists, contact the technical 
assistance service.

The water is not heated or is incorrectly heated. Repeat the washing program. If 
the problem persists, contact the technical assistance service.

Interrupt the program and switch off the dishwasher. Switch it back on again, 
program a new cycle and press start. If the problem persists, contact the 
technical assistance service.

The appliance does not take in water or does so incorrectly. Make sure the water 
connections are correct, that the water supply tap is open and that the fi lter is 
not clogged. If the problem persists, contact the technical assistance service.

The appliance does not pump out the water or does so incorrectly. Make sure 
the drain hose is not kinked or crushed and that the siphon and fi lters are not 
clogged. If the problem persists, contact the technical assistance service.

Tab. 5-01a