Lenovo a58e 0841 Manuale Supplementare
3.
To reinstall the front bezel, align the plastic tabs on the right side of the front
bezel with the corresponding holes in the chassis. Then, pivot the front bezel
inward until it snaps into position on the left side.
bezel with the corresponding holes in the chassis. Then, pivot the front bezel
inward until it snaps into position on the left side.
Note:
If you have completely removed the front bezel off the chassis, you need
to first route and connect the power switch/LED assembly cable.
to first route and connect the power switch/LED assembly cable.
4.
Figure 3. Reinstalling the front bezel
Chapter 8. Replacing FRUs - Tamdhu Computers
85