Axis 211M Guida Utente

The Network Indicator LED can be enabled or disabled, according to requirements and the Status indicator LED 

can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing 

of all LED behavior, see page 6, or the online help.

Note that the Status LED does not flash when the stream is retrieved using MPEG-4 multicast.

•Restart - The camera is restarted without changing any of the settings.
•Restore - The unit is restarted and most current settings are reset to factory default values. The settings that 

will not be reset are as follows:

• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the  subnet  mask

•Default - The default button should be used with caution. Pressing this will return all of the camera's settings 

to the factory default values (including the IP address).
Upgrade Server - See Upgrading the Firmware, on page 39.
Backup - To take a backup of all of the parameters, and any user-defined scripts, click this button. If necessary, 

it will then be possible to return to the previous settings, if settings are changed and there is unexpected 

behavior.

Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. 

The settings will be restored to the previous configuration.

Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration 
of multiple units or for firmware upgrades.

The Support overview page provides valuable information on troubleshooting and contact information, should 

you require technical assistance.

System Overview - is a quick look at the camera’s status and settings. Information that can be found here 

includes the camera’s Firmware version, IP address, Security, Optional Network Services, Event Settings, Image 

settings and Recent log items. Many of the captions are also links to the proper Setup page to conveniently 

make adjustments in the camera’s settings. 

Logs & Reports - when contacting Axis support, please be sure to provide a valid Server Report with your 

query.

Information 
Logs, Server Report and Parameter List all provide valuable information for troubleshooting and when 

contacting Axis support.

Configuration
Log Level for Log Files - from the drop-down list, select the level of information to be added to the Log file

Log Level for Email - from the drop-down list, select the level of information to send as email and enter the 

destination email address.