Axis 207MW Manuale Utente

Lock ring

Network 

connector

Network 

indicator

Control 

button

Product ID & 

serial number 

(S/N) label

Wireless indicator 

Power

indicator

I/O terminal

connector

Power

connector

Focus ring

Status

indicator

(outer ring)

Microphone

Antenna

Antenna - For connection to wireless networks. Compatible with IEEE 802.11b/g networks 

at speeds of up to 54 Mbit/s.

Microphone - Built-in microphone for one way MPEG-4, ISMA, 3GPP compatible audio.
Power Connector - For connection of the PS-H power supply.
I/O Connector - The I/O terminal connector provides the physical interface to one 

transistor output, one digital input and an auxiliary connection point for DC power. For 

more information, see The I/O Terminal Connector, on page 38.

Network Connector - This can be used for the initial wired installation and configuration. 

Uses a standard or crossover network cable, which is automatically detected by MDI-X 

autocrossover. Once installed, this connection can be removed and the unit can be run 

wirelessly.

Product ID & Serial Number Label - The serial number may be required during 

installation. 

Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service, 

or to restore the factory default settings, as described in Resetting to the Factory Default