Pantech crossover Guida Specifiche
11
Getting Started
About the battery
Crossover uses a Lithium Ion (Li-Ion) battery. Make sure to use
the authorized battery and charger only. Maximum hours to
use the battery might vary depending on service types offered
by the service provider and temperatures. For more details,
inquire at your nearest dealer.
the authorized battery and charger only. Maximum hours to
use the battery might vary depending on service types offered
by the service provider and temperatures. For more details,
inquire at your nearest dealer.
Note The Li-Ion battery can be recharged while some charge
remains without reducing your phone’s autonomy due to the
“battery memory effect” inherent in those technologies.
remains without reducing your phone’s autonomy due to the
“battery memory effect” inherent in those technologies.
Charging the battery
1. Open the protective cover on the right side of Crossover
and connect the charger adapter to the USB connector of
Crossover.
Crossover.
Correct
Incorrect
Note Make sure to align the connector as indicated in the image.
Otherwise, the charging connector will be damaged and the battery
will not be charged.
Otherwise, the charging connector will be damaged and the battery
will not be charged.
Inserting the battery
1. Press and hold the latch and slide it to remove the battery
cover.
2. Align the gold contacts on the battery with the contacts
located at the top of the battery compartment on the phone.
3. Press the battery down until it lays flat in the compartment.
4. Close the battery cover by sliding it up until you hear “click.”
Latch
Â
Â
Correct method of inserting the battery
Correct
Incorrect
Correct method of installing the battery cover
Correct
Incorrect