Pantech pocket Guida Utente

Getting Started

Charging the battery

1. Open the protective cover on the right side of the phone

and connect the charger adapter to the USB connector of

the phone.

Correct

Incorrect

Note Make sure to align the connector as indicated in the image.

Otherwise, the charging connector will be damaged and the battery

will not be charged.



Battery Charging - Power ON

applications to the SD card. You can expand the external

memory up to 32GB. We recommend that you format the

microSD card before using the phone. For more information,

Inserting the battery

1. Put your thumb in the groove at the bottom of the phone,

and then lift it up to remove the battery cover.

2. Align the gold contacts on the battery with the contacts

located at the top of the battery compartment on the phone.

3. Press the battery down until it lays flat in the compartment.
4. Close the battery cover.

About the battery

The phone uses a Lithium Ion (Li-Ion) battery. Make sure to use

the authorized battery and charger only. Maximum hours to

use the battery might vary depending on service types offered

by the service provider and temperatures. For more details,

inquire at your nearest dealer.

Note The Li-Ion battery can be recharged while some charge

remains without reducing your phone’s autonomy due to the

“battery memory effect” inherent in those technologies.