Pantech pocket Guida Utente

73

Connectivity

3.  Tap Wi-Fi to activate the technology. The phone scans 

networks automatically every six seconds. The newly found 

networks appear on the bottom of the list.

Adding a Wi-Fi network

1.  Tap Settings from the applications menu.
2.  Tap Wireless & networks > Wi-Fi settings.
3.  Tap Wi-Fi to activate the technology.
4.  Tap Add Wi-Fi network.
5.  Enter a Network SSID and select the security type among 

Open, WEP, WPA/WPA2 PSK and 802.1x EAP. Aside from 

Open, you must enter a password for the network.

6.  Tap Save.

Disconnecting to a Wi-Fi network

1.  Tap the network that is connected to the phone.
2.  Tap Forget to disconnect with the network.

Note You can also disconnect to the Wi-Fi network by pressing and 

holding the network and tapping Forget network.

Connecting to a 3G network

Use 3G (or EDGE if available) to connect the phone to the 

Internet and exchange multimedia messages. You will need a 

data plan to access a 3G network.
3G settings are already preconfigured on the phone, and it is 

ready to use 3G services. Please do not change the settings; 

this may cause services to stop working. 

Note Using 3G loads Internet data faster in some cases, but may 

decrease battery performance. If you are making a lot of phone calls, 

you may want to turn 3G function off to extend battery performance.

Using Bluetooth

Bluetooth technology enables wireless connections between 

electronic devices. Using this technology, you can send 

images, text, and business cards.
With Bluetooth technology, the phone provides:

 x Connection to hands-free devices.
 x Connection to electronic devices.

Pairing with devices

1.  Tap Settings from the applications menu.
2.  Tap Wireless & networks > Bluetooth settings.
3.  Tap Bluetooth to activate the technology.
4.  Tap Scan for devices.
5.  Select and tap a device from the list.
6.  Enter PIN to pair with the device.
7.  Tap OK.

Scanning devices

Requesting pairing