NEC FP1375X Manuale Utente

1.

Connect the SpectraView video cable to input connector on monitor.

•For the 

MultiSync FP955 / FP1375X connect the DVI-A connector of the

SpectraView video cable to the DVI input connector on the monitor.

•For the 

DiamondPro 930SB-BK, DiamondPro 2070SB-BK and MultiSync

FP2141SB-BK connect the captive cable or the VGA cable on the monitor to the
female end of the 15-pin adapter and the male end to the computer system.  Skip to
Step #3.

•For the 

DiamondPro 2060u connect the VGA connector (without the USB pig-tail

connector) of the SpectraView video cable to Signal B on the monitor.

2. Connect the VGA connector (with the USB pig-tail connector) of the SpectraView video

cable to the output connector of the computer system.

3. Connect the USB pig-tail connector of the SpectraView video cable to an available USB

connector on the computer system.  

BK and MultiSync FP2141SB-BK use the USB pig-tail of the adaptor to connect to the
computer.

4. Connect the USB connector of the SpectraView Color Calibrator to an available USB

connector on the computer system.

5. Remove adhesive covering on the Velcro tabs of the SpectraView hood and attach the

hood to the front top and sides of the monitor bezel (Figure 1).