NEC FP1375X Manuale Utente

3

To attach the MultiSync

®

 FP

1375X

™

 monitor to your system, follow

these instructions:

1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information,

refer to the display card manual.

3. For the PC with Analog output: Connect the 15-pin mini D-SUB to DVI signal

cable to the connector of the display card in your system (Figure A.1).

For the PC with DVI digital output: Connect the DVI signal cable to the
connector of the display card in your system (Figure A.2). Tighten all screws.

For the Mac: Connect the MultiSync FP

1375X

 Macintosh cable adapter (not

included) to the monitor connector on the Macintosh (Figure B.1). Attach the
15-pin mini D-SUB end of the captive signal cable to the MultiSync FP

1375X

Macintosh cable adapter on the computer (Figure B.1). Tighten all screws.

4. For download information on the Windows

®

 95/98/2000/Me INF file for

your MultiSync monitor, refer to the References section of this User’s Manual.

5. Connect one end of the power cord to the MultiSync FP

1375X

 monitor and the

other end to the power outlet (Figure C.1).

6. Turn on the monitor (Figure D.1) and the computer.
NOTE: If you have any problems, please refer to the Troubleshooting section of

this User’s Manual.

Figure A.1

Detachable

Signal Cable

DVI-A or 15-pin

mini D-SUB

DVI-A or 15-pin

mini D-SUB

USB

Cable

Figure A.2

Detachable

Signal Cable

DVI-D

USB

Cable

DVI-D