NEC 42VP4 Manuale Utente

27

䡵

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

On

Off

Picture already on.

Operate the keyboard or
mouse. The picture
reappears.

Green

Red

Not activated.

Activated.

 Description

Horizontal and vertical
synchronizing signals
are present from the
computer.

Horizontal and/or
vertical synchronizing
signals are not sent
from the computer.

The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I
(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]

Example: Setting the “CINEMA MODE” to “OFF”

1. Use the ▲ and ▼ buttons to select “OPTION2”, then

press the MENU/ENTER button.
The “OPTION2” screen appears.

2. Use the ▲ and ▼ buttons to select “CINEMA MODE”.

3. To set the CINEMA MODE to “OFF” ...

Use the 

䊴

 and 

䊳

 buttons to select “OFF”.

The mode switches as follows each time the 

䊴

 or 

䊳

button is pressed:

↔

4. Once the setting is completed ...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

䡵

ON ...................

Automatic discrimination of the
image and projection in cinema mode.

OFF

................... Cinema mode does not function.

䡵

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce burn-in of the screen.

1. Use the ▲ and ▼ buttons to select “OPTION2”, then

press the MENU/ENTER button.
The “OPTION2” screen appears.

2. Use the ▲ and ▼ buttons to select “LONG LIFE”, then

press the MENU/ENTER button.
The “LONG LIFE” screen appears.

3. Set the LONG LIFE mode using ▲▼

䊴

 and 

䊳

 buttons.

See page 27 to set PLE.
See page 28 to set ORBITER.
See page 28 to set INVERSE.
See page 29 to set SCREEN WIPER.

4. Once the setting is completed...

Press the EXIT button to return to the OPTION2 screen.
To return to the main menu, press the EXIT button once
more.

䡵

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

PLE (Peak Luminance Enhancement)

Use this to activate the brightness limiter.

Example: Setting “PLE” to “LOCK1”

3. Use the ▲ and ▼ buttons to select “PLE”.

4. Use the 

䊴

 and 

䊳

 buttons to select “LOCK1”.

The mode switches as follows each time the 

䊴

 or 

䊳

button is pressed:

→

↔

↔

↔

←