NEC e808y Manuale Del Prodotto

-57-

(Press the “MENU” key 

→ Select “Service (SAT)”)

You can use the SAT (Subscriber Identity Module Application Toolkit) provided by 3 from Service (SAT). SAT

provides an authentication to the mobile network so you can use your rights: change personal setting

options, give a digital signature, etc. Ask 3 for details.

(Press the “Menu” key 

→ Select “External Connect”)

You can connect e808 with a USB cable and establish a dialup connection for the PC through e808. This

function is only available in the 3G mode.

Please check that your operator allows use of your e808 as a modem to connect to the internet.

Connecting e808 to a PC with an USB cable enables the PC to use e808 just like the modem to establish a

PPP connection to the Internet service provider by dialup. However, you will find that the USB connection will

provide a much faster transfer rate than a standard modem.
USB connection also enables data transfer to/from the PC. Refer to To/From PC on page 139 for details.

1

Connect e808 and the PC

with a USB cable.

Insert the USB cable to the I/O connector of e808 and the USB HUB on the 

PC.
Note : Use the USB cable attached to e808.
Note : Insert the USB cable vertically to e808 (do not insert it at an angle).

2

Start up the external

connection function 

Press the MENU key and select External Connect.
Network connection standby screen is displayed.

3

Dial up

From the PC application, start the dialup.

4

Disconnect

Disconnect from the PC application.