US Robotics usr8000a Guida All'Installazione

7

 

Right-click My Computer and then click Explore. Double-click Dial-Up Networking. Select your 

ISP connection from the Phonebook entry drop-down menu. Click More and select Edit entry 

and modem properties. Click the  Server  tab and then click the  TCP/IP Settings button. Pro-

ceed to Step B.

 

Click Windows Start , Settings , and then Dial-Up Networking . Right-click your ISP connection 

and click Properties. Click the Networking  tab and then click the  TCP/IP Settings button. Pro-

ceed to Step B. 

 

Click Windows Start  and then Control Panel. Double-click Network Connections. Right-click 

your ISP connection and click Properties . Click the Networking tab, select Internet Protocol 

(TCP/IP) from the menu, and click  Properties. Proceed to Step B.

Click Apple , Control Panels, and then TCP/IP . Proceed to Step B.

Click Apple , System Preferences, and then Network. Proceed to Step B.

 

You should now be in the TCP/IP Properties window. 

•

If the  Server assigned IP address and  Server assigned name server addresses options are 

selected, you have a Dynamic IP address. Close any open properties windows and may proceed 
with the installation of the Broadband Router. 

•

If these options are not selected, you have a Static IP address and will need to check for the fol-
lowing information: IP Address, Subnet Mask, and Default Gateway. You may proceed to the 

analogue or ISDN Connecting section.

 

Ensure that the Connect via: option is set to Connect via: Ethernet.

•

If the  Configure:  option is set to Manually, write any of the suplied information in the previous 
table. Set the Configure:  option to Using DHCP Server.

•

If the  Configure: option is set to any other selection, change it to Using DHCP Server. 

Click Save and close the TCP/IP or network window. You may proceed to the analogue or ISDN 
Connecting section.