UMAX 1200s Guida Utente

 
 
When the scanner’s SCSI ID is properly set (see “Changing the SCSI ID Number” section for instructions 
on setting the scanner’s SCSI ID), do the following to connect the scanner to your computer: 
 

1.  Turn off your computer and unplug the power cord. 
2.  Locate the SCSI Cable.  Connect the 25-pin cable connector to the Macintosh SCSI port. 
3.  Attach the other end of the cable to one of the SCSI ports on your scanner. 
4.  If your scanner is not chained to other SCSI devices, please connect the Terminator to the 

remaining SCSI port of your scanner.  

5.  Connect the power adapter to the scanner. 
6.  Turn on the computer. 

 

 
Install the image editing software included with your scanner.  Refer to the instructions included with the 
appropriate software. 
 
To install the scanner drivers, do the following: 
 

1.  Turn on your computer. 
2.  Install your image editing software first. (e.g. Photoshop, PhotoDeluxe, etc.) 
3.  Insert the UMAX Scanner CD into your CD-ROM drive. 

 

 

 

4.  Double-click on the UMAX Scanner CD Installer icon. 

 

 

 

 

5.  Follow the on-screen instructions to complete the installation. 
6.  Procedures on how to use the bundled software are provided in the Quick Start Guide. 

 

 

 

 
 
 
 
 

 

9