Cyberhome dvr 1200mu Guida Al Funzionamento
21
1
Next, select an input source or TV channel to record
from with the 5/6keys. For TV channels, use the
number keys to specify your selection.
from with the 5/6keys. For TV channels, use the
number keys to specify your selection.
Video 1
Once
HQ
Specify the Recording Quality mode you wish to use
for the recording with the 5/6 keys.
for the recording with the 5/6 keys.
Setting the Quality Mode
Downmix
Dynamic Range
SPDIF (Digital) Output
The Recurrence setting indicates when the scheduled
recording will take place or repeat.
recording will take place or repeat.
ONCE (No Repeat) - One time recording, specify a
Time, Date, etc. This event is deleted after the recording
Can be set up to 30 days in advance only.
Time, Date, etc. This event is deleted after the recording
Can be set up to 30 days in advance only.
DAILY - The recording is repeated every day and the
date setting is ignored.
date setting is ignored.
WEEKLY - The recording is repeated once each week
on the day specified in the START time.
on the day specified in the START time.
MON - FRI - Recording is repeated daily except on
Saturday and Sunday.
Saturday and Sunday.
1
Select a Recurrence option with the 5/6keys.
1
The RESULTS field will return the current status of the
event:
event:
Done - Recording is finished.
OK - Event is ready and waiting to record.
Overlap - Two events overlap, needs editing.
Changing Setup Options
Setup Menu
These are the Setup features for your recorder’s Audio
and Video functions. Press SETUP and navigate using
the 5/6 keys.
and Video functions. Press SETUP and navigate using
the 5/6 keys.
Default setting: OFF
Dynamic Range Control, also called “Midnight Mode”
reduces the difference between the low and high audio
levels known as compression. Makes watching movies
at low volume levels enjoyable.
reduces the difference between the low and high audio
levels known as compression. Makes watching movies
at low volume levels enjoyable.
Default setting : Off
Determines the audio format output by the Optical and
Coaxial Digital Audio Output. When playing a Dolby 5.1
soundtrack, leave the setting on RAW to output the
encoded digital signal to a Digital Receiver with a Dolby
5.1 Decoder. If your receiver is not capable of decoding
a Dolby signal, use the PCM setting.
Coaxial Digital Audio Output. When playing a Dolby 5.1
soundtrack, leave the setting on RAW to output the
encoded digital signal to a Digital Receiver with a Dolby
5.1 Decoder. If your receiver is not capable of decoding
a Dolby signal, use the PCM setting.
When playing CDs, leave this setting at PCM to output a
stereo signal on the Digital Output.
stereo signal on the Digital Output.
Default setting : RAW
Audio / Video
DVDs usually feature Dolby 5.1 channel soundtracks,
you need to downmix these movies with only a stereo TV
or capable receiver. Stereo should be used for most TV
and stereo equipment. The LT/RT option should be used
with Dolby Pro Logic receivers.
Default setting : LT / RT
you need to downmix these movies with only a stereo TV
or capable receiver. Stereo should be used for most TV
and stereo equipment. The LT/RT option should be used
with Dolby Pro Logic receivers.
Default setting : LT / RT
1
By default, the Start times are set to the current time
and recording length to one hour.
and recording length to one hour.
2
The next field to make an entry in is the START
TIME, or when you would like to have the timer
recording begin recording. Use the 5/6 keys to
increase/decrease and 3/4 keys to navigate
between fields.
TIME, or when you would like to have the timer
recording begin recording. Use the 5/6 keys to
increase/decrease and 3/4 keys to navigate
between fields.
3
The next field is to enter the length of time you wish
to record for. Set hours and minutes here.
to record for. Set hours and minutes here.
Setting Start Time and Recording Length
08
:00 PM
01:30
Setting Source
Setting the Repeat Mode
NOTE: Make sure a recordable disc is inserted
before a scheduled recording.
before a scheduled recording.
Saving the Schedule
1
Press ENTER to add the entry to the schedule list
when all parameters are set.
when all parameters are set.
To exit the Schedule Screen, press SCHEDULE.
2
1
To change or delete a recording schedule, press the
SCHEDULE key to access the Schedule Screen.
Use the 5/6to select the scheduled event to be
edited and press ENTER.
SCHEDULE key to access the Schedule Screen.
Use the 5/6to select the scheduled event to be
edited and press ENTER.
Editing or Deleting a Saved Schedule