EchoStar ad-3600 ip viaccess Manuale Utente
EchoStar Tri Control, Programmable Remote Control Unit
Page A2 - 6
EchoStar AD-3600IP Viaccess
©
2001
2001
E
c
hoS
ta
r
Int
er
nat
ion
a
a
l
C
or
por
at
ion
A
ll
right
s
res
er
er
v
e
d
6.
SPECIAL FUNCTIONS
6.1. VOLUME LOCK (PUNCH THROUGH)
The RCU allows you to select the device that you want to control the volume of,
independently from any other mode. As an example, if you are in the SAT mode, you can stay
in the SAT mode and adjust the volume of the TV directly with the volume +/- key.
independently from any other mode. As an example, if you are in the SAT mode, you can stay
in the SAT mode and adjust the volume of the TV directly with the volume +/- key.
1.
On the RCU, press the TV key continuously until the indicator stays on.
2.
Release the TV key and make sure the indicator blinks continuously.
3.
Use the numerical keys to enter code 9 9 3.
4.
Press the TV key once.
5.
Note that the indicator blinks three times.
6.
Now the volume control is locked to the TV except for the AUX mode.
6.2. RESET VOLUME LOCK (PUNCH THROUGH)
1.
On the RCU, press the SAT key continuously until the indicator stays on.
2.
Release the SAT key and make sure the indicator blinks continuously.
3.
Use the numerical keys to enter code 9 9 3.
4.
Press the Volume + key once and note that the indicator blinks four times.
5.
Now the volume control is unlocked to control the device that belongs to that key.
6.3. FACTORY RESET
1.
On the RCU, press the SAT key continuously until the indicator stays on.
2.
Keep the SAT key pressed.
3.
Use the numerical keys to enter code 9 8 1 and note that the indicator blinks four times.
4.
Now the RCU is programmed with the factory settings and ready for reprogramming.
NOTE
The procedures to set the volume lock for the TV, VCR, DVD and Audio equipment
is identical, therefor only the procedure to set the volume lock for the TV is given.
is identical, therefor only the procedure to set the volume lock for the TV is given.