EchoStar ad-3000 ip Manuale Utente
3
1
INSTALLING THE BATTERIES
Your Tri Control needs 2 new "AA/LR06" alkaline batteries.
1.
Remove the battery cover from the back of your Tri Control by pressing down on the tab.
2.
Match the batteries to the (+) and (-) marks inside the battery case, then insert the
batteries.
batteries.
3.
Press the battery cover back into place.
Important note :
In order to avoid having to reprogram your Tri Control after you remove the batteries , you will
need to insert new batteries within 15 minutes. Also it is best that you do not use rechargeable
batteries.
In order to avoid having to reprogram your Tri Control after you remove the batteries , you will
need to insert new batteries within 15 minutes. Also it is best that you do not use rechargeable
batteries.
2
THE KEYPAD
Power Key
The Power key turns on and off your EchoStar Receiver and controls the same function as it did
on your TV and Video original remote control.
The Power key turns on and off your EchoStar Receiver and controls the same function as it did
on your TV and Video original remote control.
LED
The LED (Light Emitting Diode) flashes red to show the remote is working.
The LED (Light Emitting Diode) flashes red to show the remote is working.
Device Keys
The TV, VCR and SAT keys select the device to be controlled. For example pressing the SAT
key allows the remote to control the functions of your EchoStar Satellite Receiver, after pressing
TV, you can operate your Television and the VCR key operates your Video Recorder. These keys
are also used to set Up your different devices.
The TV, VCR and SAT keys select the device to be controlled. For example pressing the SAT
key allows the remote to control the functions of your EchoStar Satellite Receiver, after pressing
TV, you can operate your Television and the VCR key operates your Video Recorder. These keys
are also used to set Up your different devices.
Volume, Channel Keys
The Volume and Channel keys control the two most frequently used functions of your Television
and Satellite Receiver. They operate just as those on your original TV remote.
The Volume and Channel keys control the two most frequently used functions of your Television
and Satellite Receiver. They operate just as those on your original TV remote.
Mute Key
The Mute key operates the same function it does on your original TV remote control
The Mute key operates the same function it does on your original TV remote control
Number/Input Keys
The Number/Input keys (0-9, TV/RAD, FAV) provide functions just like your original remote,
such as direct access programme selection. If your original remote uses one/two digit input
switching (-/--, 10 or 20 symbol), this function can be obtained by pressing the -/-- key, this is the
same as the FAV key. If your original remote has an AV key, this function can also be found
under the TV/RAD key.
The Number/Input keys (0-9, TV/RAD, FAV) provide functions just like your original remote,
such as direct access programme selection. If your original remote uses one/two digit input
switching (-/--, 10 or 20 symbol), this function can be obtained by pressing the -/-- key, this is the
same as the FAV key. If your original remote has an AV key, this function can also be found
under the TV/RAD key.
BACK UP Key
Will operate on your TV as previous programme or channel (P < P).
Will operate on your TV as previous programme or channel (P < P).